Table of Contents
Advertisement
2.4.4. Install SAS Cable
Connect the external mini-SAS HD (SFF-8644) to mini-SAS HD (SFF-8644) cable from the controller's
external port to the external storage. Please note:
SAS Expander model only require to connect one cables, that includes:
•
o MobileSTOR Tower SAS Expander models
o AccuSTOR Rackmount SAS Expander models
o EliteSTOR Rackmount SAS Expander models
Direct connect / Passive backpane model require to connect one cables per every 4 drives, that
•
includes:
o MobileSTOR Tower Direct Connect models
o TowerSTOR Tower Direct Connect models
o EliteSTOR Rackmount Direct Connect models
2.4.5. Adding a FBM/BBM Backup Module (Optional)
Please refer to Appendix B and Appendix C of the user manual for installing the flash-based/battery
backup module (FBM/BBM) in your 12Gb/s SAS RAID controller.
2.4.6. Power up the System
Thoroughly check the installation, reinstall the computer cover, and reconnect the power cord cables.
Turn on the power switch at the rear of the computer (if equipped) and then press the power button at
the front of the host computer.
2.4.7. Install the Controller Driver
For a new system:
12
Advertisement
Table of Contents
