Table of Contents
Advertisement
configure the controller only by providing the correct password. This feature is used to protect
the internal RAID system from unauthorized access. The controller will check the password only
when entering the main menu from the initial screen. The system will automatically go back to
the initial screen if it does not receive any command in 5 minutes. To set or change the
password, move the cursor to "Raid System Function" screen, press the "Change Password"
item. The "Enter New Password" screen will appear. Do not use spaces when you enter the
password, If spaces are used, it will lock out the user. To disable the password, only press Enter
key in both the "Enter New Password" and "Re-Enter New Password" column. The existing
password will be cleared. No password checking will occur when entering the main menu.
3.7.5.4.
JBOD/RAID Function
JBOD is an acronym for "Just a Bunch Of Disk". A group of hard disks in a RAID box are not set up
as any type of RAID configuration. All drives are available to the operating system as an
individual disk. JBOD does not provide data redundancy. User needs to delete the RAID set,
when you want to change the option from the RAID to the JBOD function.
3.7.5.5.
Background Task Priority
The "Background Task Priority" is a relative indication of how much time the controller devotes
to a rebuild operation. The SAS RAID controller allows the user to choose the rebuild priority
(UltraLow, Low, Normal, High) to balance volume set access and rebuild tasks appropriately.
41
Advertisement
Table of Contents
