Table of Contents
Advertisement
Press Yes key in the "Create Vol/Raid Set" dialog box, the RAID set and volume set will start to initialize
it. Select "Foreground (Faster Completion)" or "Background (Instant Available)" for initialization and "No
Init (To Rescue Volume)" for recovering the missing RAID set configuration.
3.7.2. Raid Set Function
Manual configuration gives complete control of the RAID set setting, but it will take longer to configure
than "Quick Volume/Raid Setup" configuration. Select "Raid Set Function" to manually configure the
RAID set for the first time or delete existing RAID sets and reconfigure the RAID set.
3.7.2.1.
Create Raid Set
The following is the RAID set features for the SAS RAID controller. Up to 32 disk drives can be
included in a single RAID set. Up to 128 RAID sets can be created per controller, but RAID level
30 50 and 60 only can support eight sub-RAID set.
To define a RAID set, follow the procedures below:
1. Select "Raid Set Function" from the main menu.
2. Select "Create Raid Set " from the "Raid Set Function" dialog box.
23
Advertisement
Table of Contents
