Table of Contents
Advertisement
No - It keeps the volume size with max. 2TB limitation.
•
Use 64bit LBA - This option use 16 bytes CDB instead of 10 bytes. The maximum volume
•
capacity up to 512TB. This option works on different OS which supports 16 bytes CDB.
Such as: Windows 2003 with SP1 or later, Linux kernel 2.6.x or later
Use 4K Block - It changes the sector size from default 512 bytes to 4k bytes. The
•
maximum volume capacity is up to 16TB. This option works under Windows platform
only. And it cannot be converted to "Dynamic Disk", because 4k sector size is not a
standard format.
Stripe Size
•
This parameter sets the size of the stripe written to each disk in a RAID 0, 1, 1E, 10, 5, or 6
logical drive. You can set the stripe size to 4 KB, 8 KB, 16 KB, 32 KB, 64 KB, 128 KB, 256KB,
512KB, or 1024KB.
Warning: Roaming the stripe size 256K/512K/1024K RAID Set to firmware version older than
1.52 will cause data corruption.
The SAS RAID controller function simulates a external SCSI RAID controller. The host bus
represents the SCSI channel. Choose the "SCSI Channel". A "Select SCSI Channel" dialog box
appears; select the channel number and press the Enter key to confirm it.
31
Advertisement
Table of Contents
