Table of Contents
Advertisement
It is typically used on a system where the operating system is on a disk not controlled by the SAS
RAID controller firmware. The SCSI Channel/SCSI ID/SCSI LUN, Write Protect, Cache Mode, and
Tag Queuing must be specified to create a pass-through disk.
3.7.4.3.
Modify Pass-Through Disk
Use this option to modify "Pass-Through Disk Attributes". To select and modify a pass-through
disk from the pool of pass-through disks, move the "Modify Pass-Through Drive" option and
then press the Enter key. The "Physical Drive Function" menu will show all pass-through drive
number options. Move the cursor bar to the desired number and then press the Enter key to
show all pass-through disk attributes. Select the parameter from the list to be changed and then
press the Enter key to modify it.
3.7.4.4.
Delete Pass-Through Disk
To delete a pass-through drive from the pass-through drive pool, move the cursor bar to the
"Delete Pass-Through Drive" item, then press the Enter key. The "Delete Pass-Through
confirmation" screen will appear; select Yes to delete it.
3.7.4.5.
Set Disk To Be Failed
It sets a normal working disk as "failed" so that users can test some of the features and
functions.
38
Advertisement
Table of Contents
