Table of Contents
Advertisement
1 x User manual
•
1 x Low-profile bracket
•
2.2. Board Layout
This section provides the board layout and connector/ jumper for the 12Gb/s SAS RAID controller.
Connector
J2
J3
J4
SCN1
SCN2
2.3. Tools Required
An ESD grounding strap or mat is required. Also required are standard hand tools to open your system's case.
System Requirement
The 12Gb/s SAS RAID controller can be installed in an universal PCIe slot and requires a motherboard
that Comply with the PCIe 3.0 x8 lanes. It can work on the PCIe 3.0 x1, x4, x8, and x16 signal with x8 or
x16 mechanical slot M/B. Backward-compatible with PCIe 1.0/2.0
Installation Tools
The following items may be needed to assist with installing the 12Gb/s SAS RAID controller into an
available PCIe expansion slot.
Small screwdriver
•
Type
Flash-based/Backup Module Connector
I2C/LCD Connector
Ethernet Port
Mini SAS HD 5-8 ports (External)
Mini SAS HD 1-4 ports (External)
10
Description
14-pin box header
7-pin header
RJ45
SFF-8644
SFF-8644
Advertisement
Table of Contents
