Table of Contents
Advertisement
1. Select the target disk by clicking on the appropriate check box.
2. Press the Enter key to select a disk drive and press Yes in the "Create Hot Spare" to
designate it as a hot spare.
The "Create Hot Spare" gives you the ability to define a global or dedicated hot spare. Unlike
"Global Hot Spare" which can be used with any RAID sets, "Dedicated Hot Spare" can only be
used with a specific RAID set or Enclosure. When a disk drive fails in the RAID set or enclosure
with a dedicated hot spare is pre-set, data on the disk drive is rebuild automatically on the
dedicated hot spare disk.
3.7.2.7.
Delete Hot Spare
Select the target hot spare disk to delete by clicking on the appropriate check box. Press the
Enter key to select a hot spare disk drive, and press Yes in the "Delete Hot Spare" screen to
delete the hot spare.
3.7.2.8.
Rescue Raid Set
When the system is powered off in the RAID set update/creation period, it possibly could
disappear due to this abnormal condition. The "RESCUE" function can recover the missing RAID
set information. The RAID controller uses the time as the RAID set signature. The RAID set may
have different time after the RAID set is recovered. The "SIGANT" function can regenerate the
signature for the RAID set.
27
Advertisement
Table of Contents
