Table of Contents
Advertisement
"SNMP Operation & Installation". The MIBs file resides at: <CD-ROM>\packages\SNMP_MIBs on the
software CD.
4. Note: After you confirm and submit configurations, you can use "Generate Test Event" feature to make sure
these settings are correct.
Rescan Device Configuration: The ArcHTTP scans the RAID controllers on the system and creates an
•
individual RAID controller icon located on left column of the "ArcHTTP Configurations" screen. If any RAID
controller is missed at system start-up, then you can use the "Rescan Device" function to rescan the targets
to allow a missed RAID storage to be added.
Collect Support Data: The "Collect Support Data" option on the ArcHTTP is used to
•
controller's information (system information, configuration, disk information and event log) to a supported
file (file name:ctlrxx-xxxxx.log). It will be automatically started when ERROR or SERIOUS event has occurred.
6. Web Browser-based Configuration
The firmware-based browser McRAID storage manager is a web-based RAID management interface. Before it can work
correctly, you will need to install the controller card to the computer. If you need to boot up the operating system from
a RAID volume set, you must first create a RAID volume by using McBIOS RAID manager. Please refer to section 3.3
Using Quick Volume /Raid Setup Configuration for information on creating this initial volume set.
The McRAID storage manager is firmware-based utility, which is accessible via the web browser installed on your
operating system. The web browser-based McRAID storage manager is a HTML-based application, which utilizes the
browser (IE, Chrome and Mozilla etc) installed on your monitor station.
It can be accessed through the in-band PCIe bus or out-of-band LAN port. ArcHTTP is used to launch the in-band web
browser-based McRAID storage manager. The firmware-embedded web browser-based McRAID storage manager allows
local or remote to access it from any standard internet browser via a LAN or WAN with no software or patches required.
The firmware contains SMTP manager monitors all system events and user can select either single or multiple user
notifications to be sent via LAN with "Plain English" e-mails. The firmware-embedded SNMP agent allows remote to
monitor events via LAN with no SNMP agent required. Use the McRAID storage manager to:
67
download all
Advertisement
Table of Contents
