Table of Contents
Advertisement
6.7.3. Delete Pass-Through Disk
To delete a pass-through drive from the pass-through drive pool, move the mouse cursor bar to the
main menus and click on the "Delete Pass Through" link. After you complete the selection, mark the
check box for "Confirm The Operation" and click on the "Submit" button to complete the delete action.
6.7.4. Clone Disk
Instead of deleting a RAID set and recreating it with larger disk drives, the "Clone Disk" function allows
the users to replace larger disk drives to the RAID set that have already been created. Click on the
"Clone Disk" option on the "Physical Drives" link to enable the clone function. If there is an available
disk, the "Select The Drives For Cloning" screen appears. There are two "Clone Disk" function options:
"Clone And Replace " and "Clone Only."
Clone Disk Procedure
1. Select one of the members as the "Clone Source" (status indicated as Raid Set # ) by clicking on the
appropriate check box.
2. Select a "Clone Target" (status indicated as Free or Hot Spare by clicking on the appropriate check
box.
3. If you have available disk member, you can repeat above procedures to define another clone pair.
4. Select clone type.
The pair number for both the "Clone Source" and the "Clone Target" will be indicated in the screen.
Click on the "Confirm The Operation" check box and click on the "Submit" button on the screen; the
controller will automatically start the cloning process using the existing "stand-by" (Free or Hot Spare
drive) to clone the source drive (the Raid Set member drive). The cloning process percentage will be
indicated in the "Volume State" area of the "Volume Set Information" screen. Completion of the Clone
function process will be indicated by a notification message on the event log.
83
Advertisement
Table of Contents
