Table of Contents
Advertisement
3.7.1. Quick Volume/Raid Setup
"Quick Volume/Raid Setup" is the fastest way to prepare a RAID set and volume set. It requires only a
few keystrokes to complete. Although disk drives of different capacity may be used in the RAID set, it
will use the capacity of the smallest disk drive as the capacity of all disk drives in the RAID set. The
"Quick Volume/Raid Setup" option creates a RAID set with the following properties:
All of the physical drives are contained in one RAID set. The RAID level, hot spare, capacity, and stripe
size options are selected during the configuration process. When a single volume set is created, it can
consume all or a portion of the available disk capacity in this RAID set.
If you need to add an additional volume set, use the main menu "Create Volume Set" function.
The total number of physical drives in a specific RAID set determine the RAID levels that can be
implemented within the RAID set. Select "Quick Volume/Raid Setup" from the main menu; all possible
RAID level will be displayed on the screen.
If volume capacity will exceed 2TB, controller will show the "Greater Two TB Volume Support"
sub-menu.
No - It keeps the volume size with max. 2TB limitation.
•
Use 64bit LBA - This option use 16 bytes CDB instead of 10 bytes. The maximum volume
•
capacity up to 512TB. This option works on different OS which supports 16 bytes CDB. Such as:
Windows 2003 with SP1 or later, Linux kernel 2.6.x or later
21
Advertisement
Table of Contents
