SMTP support for email notification
•
SNMP support for remote manager
•
Enclosure management (SES-2, SMP and SGPIO) ready
•
1.2.3. RAID Management
Field-upgradeable firmware in flash ROM
•
In-Band Manager
•
Hot key "boot-up" McBIOS RAID manager via M/B BIOS
•
Web browser-based McRAID storage manager via ArcHTTP proxy
•
server for all operating systems
•
Support Command Line Interface (CLI)
•
API library for customer to write monitor utility
•
Single Admin Portal (SAP) monitor utility
•
1.2.4. Out-of-Band Manager
Firmware-embedded web browser-based McRAID storage manager, SMTP manager, SNMP agent and
•
Telnet function via Ethernet port
API library for customer to write monitor utility
•
Operating System
•
Windows 8/Server 2012/7/2008/Vista/XP/2003
•
Linux
•
FreeBSD
•
VMware (only driver package available w/o in-band management utility)
•
Solaris 10/11 x86/x86_64
•
Mac OS X 10.4.x or higher
•
For latest supported OS listing visit http://www.sansdigital.com
2. Hardware Installation
This section describes the procedures for installing the 12Gb/s SAS RAID controllers.
2.1. Before You First Installing
This user manual gives simple step-by-step instructions for installing and configuring the 12Gb/s SAS RAID controller.
To ensure personal safety and to protect your equipment and data, reading the following information package list
carefully before you begin installing.
Package Contents
If your package is missing any of the items listed below, contact your point of purchases or contact us at
info@sansdigitial.com
before you install.
1 x 12Gb/s SAS RAID controller in an ESD-protective bag
•
1 x Installation CD – containing driver, relative software, an electronic version of this manual and other
•
related manual
9