Table of Contents
Advertisement
The HTTP management software (ArcHTTP) runs as a service or daemon, and have it automatically start the proxy for all
controllers found.
This way the controller can be managed remotely without having to sign in the server. The HTTP management software
(ArcHTTP) also has integrated the email notification and SNMP extension agent. The email notification can be configured
in local or remote standard web browser.
Note: If your connect the onboard land port of the controller to the network, you do not need to install ArcHTTP proxy
server, and you can use McRAID storage manager directly.
5.1. For Windows
You must have administrative level permissions to install SAS RAID software. This procedure assumes that the SAS
RAID hardware and Windows are installed and operational in your system.
Screen captures in this section are taken from a Windows XP installation. If you are running another version of
Windows, your installation screen may look different, but the ArcHTTP proxy server installation is essentially the
same.
1. Insert the RAID controller software CD in the CD-ROM drive.
2. Run the install.exe file that resides at: <CD-ROM>\PACKAGES\Windows\http directory on the CD-ROM.
3. The screen shows ArcHTTP installation introduction.
Follow the on-screen prompts to complete ArcHTTP proxy server software installation. A program bar
appears that measures the progress of the ArcHTTP proxy server setup. When this screen completes, you
have completed the ArcHTTP proxy server software setup.
4. After a successful installation, press "Done" to quit the installer.
McBIOS RAID Manager
McRAID
Storage
Manager
(Via ArcHTTP proxy server)
SAP Monitor (Single Admin
Portal to scan for multiple
RAID units in the network, Via
ArcHTTP proxy server)
OS-Independent
Windows,
Solaris and Mac OS X
Windows
61
Linux,
FreeBSD,
Advertisement
Table of Contents
