Table of Contents
Advertisement
2. When connection is established, the "System Login" screen appears. The SAS RAID controller default user
name is "admin" and the password is "0000".
Start-up from Ethernet Port (Out-of-Band): The SAS RAID controller also offers an alternative out-of-band
•
method for McRAID storage manager. User can access the built- in configuration without running the
ArcHttp proxy server on the host system. The web browser-based McRAID storage manager is a
HTML-based application, which utilizes the browser installed on your remote system. To ensure proper
communications between the SAS RAID controller and McRAID storage manager, please connect the SAS
RAID controller LAN port to any LAN switch port.
The RAID storage has embedded the TCP/IP & web browser based McRAID storage manager in the firmware. User
can remote manage the SAS RAID controller without adding any user specific software (platform independent) via
standard web browsers directly connected to the 10/100Mbit RJ45 LAN port.
To configure SAS RAID controller on a remote machine, you need to know its IP address. Launch your McRAID
storage manager by entering http://[IP Address] in the web browser.
Note: You can find controller Ethernet port IP address in McBIOS RAID mamager "System Information" option.
6.2. McRAID Storage Manager
The following login screen is displayed in the browser. This screen displays the initial start-up configuration.
The RaidSet Hierarchy displays the "Raid Set List", "Volume Set List", and "Physical Disk List". The RAID set
information, volume set information, and drive information can also be viewed by clicking on the "RAID Set
Hierarchy" on the main menu screen.
To display RAID set information, move the mouse cursor to the desired RAID set number, then click on it.
•
The RAID set information will be displayed.
To display volume set information, move the mouse cursor to the desired volume set number, then click on
•
it. The volume set information will be displayed.
69
Advertisement
Table of Contents
