Table of Contents
Advertisement
3.7.3.7.
Display Volume Set Info.
To display volume set information, move the cursor bar to the desired volume set number and
then press the Enter key. The "Volume Set Information" screen will be shown. You can only view
the information of this volume set in this screen, but cannot modify it.
3.7.4. Physical Drives
Choose this option from the main menu to select a physical disk and perform the operations listed
above. Move the cursor bar to an item, then press Enter key to select the desired function.
3.7.4.1.
View Drive Information
When you choose this option, the physical disks connected to the SAS RAID controller are listed.
Move the cursor to the desired drive and press Enter key to view drive information.
3.7.4.2.
Create Pass-Through Disk
A pass-through disk is not controlled by the SAS RAID controller firmware and thus cannot be a
part of a volume set. The disk is available directly to the operating system as an individual disk.
37
Advertisement
Table of Contents
