Table of Contents
Advertisement
Do not check mark the option: "SNMP Through PCI".
•
Make sure you have the latest driver and ArcHTTP, from this URL
•
"http://www.sansdigital.com".
ArcHTTP supports sending "traps" only, do not support the "get" command.
•
2. Service Method-2: using Onboard NIC.
Pay attention to below setting:
Do not check mark the option: "SNMP Through PCI".
•
Do need to fill out the "SNMP Trap Config".
•
3. Service Method-3: using in-band PCI + SNMP extension agent.
Pay attention to below setting:
Download the snmp extension agent from www.sansdigital.com.
•
The agent is to be installed on the system which has the RAID controller card.
•
Check Mark the option: "SNMP Through PCI".
•
To use in-band PCIe host bus interface, keep space (or zero) on all "SNMP Tarp IP Address"
•
options.
D-3-1 Using ArcHTTP
The HTTP management software (ArcHTTP) runs as a service or daemon, and have it automatically start
the proxy for all controllers found. This way the controller can be managed remotely without having to
sign in the server. The HTTP management software (ArcHTTP) also has integrated the ability of sending
SNMP trap. Please reference chapter 5. ArcHTTP Proxy Server Installation section to install it. The
ArcHTTP proxy server will automatically assign one additional port for setup its configuration. If you
want to change the "archttpsrv.conf" setting up of ArcHTTP proxy server configuration, for example:
General Configuration, Mail Configuration, and SNMP Configuration, please start Web Browser
http:\\localhost: Cfg Assistant. Such as http:\\localhost: 81. The port number for the first controller
McRAID storage manager is ArcHTTP proxy server configuration port number plus 1.
To enable the controller to send the SNMP traps to client SNMP manager using the IP address assigned
to the operating system, such as Net-SNMP manager, you can simply use the SNMP function on the
ArcHTTP proxy server software. To enable the RAID controller SNMP traps sending function, click on the
"SNMP Configuration" link. The ArcHTTP proxy only provide one direction to send the trap to the SNMP
manager without needing to install the SNMP extension agent on the host. If SNMP manager requests
to query the SNMP information from RAID controller, please refer the D-3-2 section. Please refer to
D-3-3 section when using Onboard NIC. For detailed information on using ArcHTTP to send the SNMP
traps, please see SNMP Traps Configuration section on 5.6 ArcHTTP Configuration.
108
Advertisement
Table of Contents
