Table of Contents
Advertisement
3.7.4.6.
Activate Failed Disk
It forces the current "failed" disk in the system to be back online. "Activate Failed Disk" function
has no effect on the removed disks, because a "removed" disk does not give the controller a
chance to mark it as "failure".
3.7.4.7.
Identify Selected Drive (Only support in SAS Expander models)
To prevent removing the wrong drive, the selected disk fault LED indicator will light for
physically locating the selected disk when the "Identify Selected Device" is selected.
3.7.4.8.
Identify Enclosure (Only support in SAS Expander models)
To prevent removing the wrong enclosure, the selected Sans Digital expander enclosure all disks
fault LED indicator will light for physically locating the selected enclosure when the "Identify
Enclosure" is selected. This function will also light the enclosure LED indicator.
39
Advertisement
Table of Contents
