Table of Contents
Advertisement
box. Click on the "Confirm The Operation" check box and click on the "Submit" button in the screen to
create the hot spares. The "Create Hot Spare" gives you the ability to define a global or dedicated hot
spare. Unlike "Global Hot Spare" which can be used with any RAID sets, "Dedicated Hot Spare" can only
be used with a specific RAID set or Enclosure. When a disk drive fails in the RAID set or enclosure with a
dedicated hot spare is pre-set, data on the disk drive is rebuild automatically on the dedicated hot spare
disk.
6.5.8. Delete Hot Spare
Select the target hot spare disk to delete by clicking on the appropriate check box. Click on the "Confirm
The Operation" check box and click on the "Submit" button on the screen to delete the hot spares.
6.5.9. Rescue Raid Set
When the system is powered off in the RAID set update/creation period, the configuration possibly
could disappear due to this abnormal condition. The "RESCUE" function can recover the missing RAID
set information. The RAID controller uses the time as the RAID set signature. The RAID set may have
different time after the RAID set is recovered. The "SIGANT" function can regenerate the signature for
the RAID set.
Note: Contact us to make sure if you need to use rescue function. Improperly usage may cause
configuration and data corruption.
74
Advertisement
Table of Contents
