Table of Contents
Advertisement
The "RAID Controller" icon bar window start appearing in the taskbar, double-click to launch the ArcHTTP
Configuration screen. Or click on the "Start" button in the Windows task bar and then click on the "Program", select
the "McRAID" and run " ArcHTTP proxy server". The ArcHTTP Configurations dialog box appears.
It shows all RAID adapters available on the system and creates an individual adapter icon located on left column of
the "ArcHTTP Configurations" screen. This adapter icon is for user to launch the selected RAID adapter web browser
RAID manager.
1. See the next chapter detailing the McRAID Storage Manager to customize your RAID volume set.
2. If you need to configure the "System Function" of ArcHTTP, please refer to section 5.6 ArcHTTP
Configuration.
5.2. For Linux
You should have administrative level permissions to install SAS RAID software. This procedure assumes that the SAS
RAID hardware and Linux are installed and operational in your system.
The following installation procedure explains how to install the SAS RAID software for Linux. The ArcHTTP proxy
server is provided on the software CD delivered with SAS RAID controller card or download from the
www.sansdigital.com. The firmware embedded McRAID storage manager can configure and monitor the SAS RAID
controller via ArcHTTP proxy server.
1. Login as root. Copy the ArcHTTP file to a local directory.
a. Insert the SAS RAID controller CD in the CD-ROM drive.
b. Copy <CD-ROM>\PACKAGES\Linux\http directory to local (Ex:/usr/local/sbin). Or
c. Download from the www.sansdigital.com.
62
Advertisement
Table of Contents
