Utility-System Reset-Reset By The Command - Panasonic KX-TDA50 Pc Programming Manual

2.6.17 Utility—System Reset—Reset by the Command
Updates the main system program and data files stored within the PBX using files taken from the SD memory
card, and resets the connected PBX.
This option is only available at Installer level.
2 copies of each of the main system files can be stored on the SD memory card. The names of these files are
as follows:
KX-TDA50
File Name
DSSYS
DSSYS_S
PSMPR
PSMPR_S
KX-TDA100/KX-TDA200
File Name
DSYS
DSYS_SUB
PMPR
PMPR_SUB
KX-TDA600
File Name
DLSYS
DLSYS_S
PLMPR
PLMPR_S
When new DSYS/DSSYS/DLSYS and PMPR/PSMPR/PLMPR files are transferred from a connected PC to
the SD memory card using the File Transfer PC to PBX (SD Card) utility (see 2.6.2 Utility—File Transfer
PC to PBX (SD Card)), they are stored as the backup files. To use these files on the PBX, it is necessary to
first swap them with the currently active files on the SD memory card.
Requirements
•
This utility only functions on PBXs version 1.005 and later.
•
On earlier versions, the reset request confirmation screen will be displayed, and files will not be updated.
Document Version 2010-11
Description
Main system data file. Contains all of the current configuration data for
the PBX.
Backup main system data file
PBX program file. Contains the software to run the MPR board of the
PBX.
Backup PBX program file
Description
Main system data file. Contains all of the current configuration data for
the PBX.
Backup main system data file
PBX program file. Contains the software to run the MPR board of the
PBX.
Backup PBX program file
Description
Main system data file. Contains all of the current configuration data for
the PBX.
Backup main system data file
PBX program file. Contains the software to run the EMPR board of the
PBX.
Backup PBX program file
2.6.17 Utility—System Reset—Reset by the Command
PC Programming Manual 57