Mercedes-Benz COMAND MY11 Operating Instructions Manual page 88

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Map usage and settings
86
Map display menu
Map orientation options
:
To set point of interest icons
;
Select North Up, Heading Up or Bird's-
X
eye View by turning cVd the COMAND
controller and press W to confirm.
To exit the menu: slide XVY the COMAND
X
controller.
The map orientation changes accordingly.
Setting the point of interest icons in the
map
You can set the points of interest you wish to
have displayed as symbols on the map. points
of interest are, for example, gas stations,
hotels, cinemas and restaurants.
The following settings are possible:
Standard Symbols
R
Icon display determined by the factory
settings
Personal Symbols
R
You can determine the icons yourself
No Symbols
R
The map does not show any icons.
To show the menu: press W the COMAND
X
controller.
Select Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select Map Display and press W to
X
confirm.
2010-05-31T09:21:57+02:00 - Seite 86
Version: 3.0.3.6
Select Standard Symbols, Personal
X
Symbols or No symbols.
If you select Personal Symbols, the list of
points of interest appears.
To switch the icon display on/off: select
X
a point of interest by turning cVd the
COMAND controller and press W to
confirm.
Depending on the previous setting, the
icons will be switched on O or off ª. You
can switch on the icon displays for more
than one point of interest.
i
The list shows all symbols that are
contained on the digital map across all
countries. However, not all points of
interest are available in all countries. As a
result, certain point of interest icons may
not be displayed on the map, even if the
symbol display is switched on.
To exit the menu: press the k back
X
button.
Map information in the display
Showing text information
During route guidance, you can have map
information displayed at the bottom edge of
the display.
To show the menu: press W the COMAND
X
controller.
Select Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select Information on map and press
X
W to confirm.
A # dot indicates the current setting.