Mercedes-Benz COMAND MY11 Operating Instructions Manual page 74

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Route guidance
72
Route overview
You can use the route overview to move along
the route section by section and view
information and details about each section of
the route.
You have entered a destination (
or a point of interest (
an intermediate stop (
To switch on navigation mode: press the
X
g function button.
To show the menu: press W the COMAND
X
controller.
Select Route in the navigation system
X
menu bar by turning cVd the COMAND
controller and press W to confirm.
Select Route Browser and press W to
X
confirm.
At the top of the display, you will see
information about the highlighted route
section, for example the distance to be driven
on the road and road designation. The
highlighted route section is marked in white
with a red border on the map.
To view the next or previous route
X
section: select Next or Previous and
press W to confirm.
i
If the first or last route section is
highlighted, you cannot select Previous or
Next.
To zoom in or out of the map: select N
X
or M and press W to confirm.
To close the route overview: select
X
Back and press W to confirm.
Off-road and off-map
Important safety guidelines
G Warning
The COMAND navigation system may direct
you to off-road routes that your vehicle may
page 51)
Y
page 61) and possibly
Y
page 59)).
Y
2010-05-31T09:21:57+02:00 - Seite 72
Version: 3.0.3.6
not be capable of traversing through without
damaging your tires, wheels or vehicle. It is
the driver's sole responsibility to determine
the suitability of the route. Off-road routes
may be of varying conditions and their
appropriateness for use may be affected by
various factors such as time of day, time of
year and immediate weather conditions that
cannot be judged or taken into consideration
by the COMAND system.
Route guidance to a destination that is
not on a digitized road
COMAND can guide you to destinations
which are within the area covered by the
digital map, but which are not themselves
recorded on the map.
These destinations are known as off-road
destinations, which you can enter using the
map, for example. In these cases, COMAND
guides you for as long as possible with
navigation announcements and displays on
roads known to the system.
Example display: route guidance to an off-road
destination
Off-road destination
:
Off-road route section (dashed blue)
;
Current vehicle position (the tip of the
=
triangle indicates the vehicle's direction
of travel)
Off-road (no street names available)
?
Shortly before reaching the last known point
on the map, you will hear the announcement:
You will enter an area with
unreliable map data in xx miles.