Mercedes-Benz COMAND MY11 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Mercedes-Benz Manuals
  4. Car Navigation system
  5. Comand MY11
  6. Operating instructions manual
Mercedes-Benz COMAND MY11 Operating Instructions Manual

Mercedes-Benz COMAND MY11 Operating Instructions Manual

2011 glk 2011 c class
Hide thumbs Also See for COMAND MY11:
Table of Contents

Advertisement

Quick Links

See also: Operating Instructions Manual
ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
É2045844282uËÍ
2045844282
Order no. 6515 6876 13 Part no. 204 584 42 82 Edition A 2011
2010-05-31T09:26:14+02:00 - Seite 1
Version: 3.0.3.6
COMAND

Operating Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COMAND MY11 and is the answer not in the manual?

Questions and answers

Related Manuals for Mercedes-Benz COMAND MY11

Summary of Contents for Mercedes-Benz COMAND MY11

  • Page 1: Operating Instructions

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:26:14+02:00 - Seite 1 d2irenkl Version: 3.0.3.6 COMAND É2045844282uËÍ Operating Instructions 2045844282 Order no. 6515 6876 13 Part no. 204 584 42 82 Edition A 2011...
  • Page 2 2010-05-31T09:26:14+02:00 - Seite 2 d2irenkl Version: 3.0.3.6 Symbols Publication details Warning Internet Environmental note Further information on Mercedes-Benz Possible damage to the vehicle vehicles and Daimler AG can be found on the Internet at the following websites: Instruction http://www.mercedes-benz.com Continuation symbol http://www.daimler.com...
  • Page 3 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 1 d2irenkl Version: 3.0.3.6 Welcome to the world of Mercedes-Benz First of all, familiarize yourself with the COMAND control panel and read the Operator's Manual thoroughly before driving off.
  • Page 4 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 2 d2irenkl Version: 3.0.3.6...
  • Page 5 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 3 d2irenkl Version: 3.0.3.6 Contents Index ............4 At a glance ........... 13 Introduction ......... 10 System settings ........37 Navigation ........... 47 Telephone ..........97 Audio ..........
  • Page 6 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 4 d2irenkl Version: 3.0.3.6 Index Interface .......... 99 1, 2, 3 ... Revoking authorization ....44 911 emergency call ....99, 184 Settings ........... 42 Telephony ........99 ®...
  • Page 7 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 5 d2irenkl Version: 3.0.3.6 Index Changing direction Destination memory ......57 Announcement phase ...... 67 Intermediate stop ......59 Change of direction phase ....67 Last destination ....... 58 Preparation phase ......
  • Page 8 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 6 d2irenkl Version: 3.0.3.6 Index First list entry Lane recommendations ...... 68 Accepting ......... 28 Explanation ........69 Freeway information ......91 Presentation ........69 Frequency input List as selection list Calling up .........
  • Page 9 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 7 d2irenkl Version: 3.0.3.6 Index Menu overview COMAND ......... 18 Passcode Mobile phone Entering ........44, 101 Authorizing ........101 Pause function ........133 ® Connecting (Bluetooth interface) .
  • Page 10 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 8 d2irenkl Version: 3.0.3.6 Index Using the main loudspeaker ..167 Sound Video DVD mode ......174 Switching on/off ......31 Wireless headphones ..... 164 Sound settings ........32 Redials ..........
  • Page 11 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 9 d2irenkl Version: 3.0.3.6 Index Track Selecting ........171 Track information ......174 Traffic jam function ......70 Traffic Program Switching off ........31 Traffic report read-aloud function ..78 Treble and bass Adjusting .........
  • Page 12 We recommend to have any service work on cause undesired operation. electronic components carried out by an authorized Mercedes-Benz Center. Warning Change or modification not expressly Warning approved by the party responsible for...
  • Page 13 Daimler recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop.
  • Page 14 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 12 d2irenkl Version: 3.0.3.6...

  • Page 15: Table Of Contents

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 13 d2irenkl Version: 3.0.3.6 COMAND operating system ....14 Multifunction steering wheel ..... 21 Operating COMAND ......24 Basic functions of COMAND ....31 Rear view camera ....... 34...
  • Page 16 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 14 d2irenkl Version: 3.0.3.6 COMAND operating system COMAND operating system Components of COMAND COMAND consists of: Overview the COMAND display the COMAND control panel with DVD changer the COMAND controller with back and clear (CLR) buttons...
  • Page 17 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 15 d2irenkl Version: 3.0.3.6 COMAND operating system COMAND control panel Function Page Function Page Switches to radio mode Number keypad Switches wavebands • Selects a station via the station presets Switches to satellite radio mode...
  • Page 18 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 16 d2irenkl Version: 3.0.3.6 COMAND operating system Function Page Function Page Accepts a call Calls up the telephone ® basic menu (Bluetooth Dials a number interface telephony) Redials Switches to navigation Rejects a call...

  • Page 19: Comand Operating System

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 17 d2irenkl Version: 3.0.3.6 COMAND operating system Back button Back button To exit the menu: press back button : briefly. COMAND changes to the next higher menu level in the current operating mode.
  • Page 20 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 18 d2irenkl Version: 3.0.3.6 COMAND operating system COMAND display Display overview The COMAND display shows the function currently selected and its associated menus. The COMAND display is divided into several areas. The radio display is shown in the example.
  • Page 21 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 19 d2irenkl Version: 3.0.3.6 COMAND operating system Navi Audio Video System Map display FM/AM radio Telephone Video DVD Calls up the system menu Setting route SatRadio Address book calculation mode Avoiding an area...
  • Page 22 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 20 d2irenkl Version: 3.0.3.6 COMAND operating system Settings Language Resetting COMAND Delete your personal data using this function before selling your vehicle, for example. If the function is activated and COMAND is switched on, the image of the rear view camera is automatically shown in the COMAND display when reverse gear is engaged.
  • Page 23 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 21 d2irenkl Version: 3.0.3.6 Multifunction steering wheel Multifunction steering wheel Function Page 9: Selects submenus in the multifunction display or scrolls through lists a Confirms your selection Operating the multifunction display Warning...
  • Page 24 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 22 d2irenkl Version: 3.0.3.6 Multifunction steering wheel To confirm your selection: press button If a change of direction is imminent, the display shows: To confirm the message: press the the road you will be turning onto a or % button.

  • Page 25: Multifunction Steering Wheel

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 23 d2irenkl Version: 3.0.3.6 Multifunction steering wheel To select the next/previous track: If the telephone has not yet been authorized, briefly press the : or 9 button. the Bluetooth Ready message appears in the multifunction display.

  • Page 26: Operating Comand

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 24 d2irenkl Version: 3.0.3.6 Operating COMAND Several phone numbers exist: press the Operating COMAND 6 or a button to display all the Selecting a main function phone numbers for the selected entry.
  • Page 27 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 25 d2irenkl Version: 3.0.3.6 Operating COMAND Audio menu The # dot indicates the current audio mode. Calling up the menu of a main function Select another audio mode, e.g. Radio, by If one of the main navigation, audio, or turning cVd the COMAND controller and telephone functions is switched on,...
  • Page 28 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 26 d2irenkl Version: 3.0.3.6 Operating COMAND Switching to radio mode Example of operation Option 1 Initial situation Press the ó function button. You would like to switch from the system The radio display appears.
  • Page 29 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 27 d2irenkl Version: 3.0.3.6 Operating COMAND To select a station: turn cVd or slide XVY the COMAND controller while the display/selection window is active. Entering characters in navigation mode (entering a city) General information The following paragraphs describe how to...
  • Page 30 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 28 d2irenkl Version: 3.0.3.6 Operating COMAND To delete an entry: select the 2 Select E, W, space, Y in succession, confirming each by pressing W. symbol by sliding VÆ and turning cVd the COMAND controller and hold W until the entire entry has been deleted.
  • Page 31 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 29 d2irenkl Version: 3.0.3.6 Operating COMAND Option 2: city list as selection list Creating a new entry in the phone book COMAND either shows the selection list Call up the input menu with data fields automatically or you can call up the selection page 108).
  • Page 32 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 30 d2irenkl Version: 3.0.3.6 Operating COMAND Option 1 Select S by turning cVd and sliding ZVÆ the COMAND controller and press W to Select 4 or 5 in the character bar and confirm.
  • Page 33 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 31 d2irenkl Version: 3.0.3.6 Basic functions of COMAND To change the language of the Muting character bar: select B and press W Switching an audio and video source to confirm.

  • Page 34: Basic Functions Of Comand

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 32 d2irenkl Version: 3.0.3.6 Basic functions of COMAND You can also adjust the volume for the following: navigation announcements phone calls the Voice Control System (see the separate operating instructions) Adjusting the volume for navigation announcements...
  • Page 35 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 33 d2irenkl Version: 3.0.3.6 Basic functions of COMAND With the fader function, you can control video DVD (PCM, dts and Dolby Digital whether the sound is louder in the front or the audio formats) rear of the vehicle.

  • Page 36: Rear View Camera

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 34 d2irenkl Version: 3.0.3.6 Rear view camera ® ® Select Logic7 On or Logic7 Off by turning cVd the COMAND controller and press W to confirm. Depending on your selection, surround sound is switched on or off and the menu is exited.
  • Page 37 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 35 d2irenkl Version: 3.0.3.6 Rear view camera previously selected display as soon as you shift out of reverse gear. Press the S function button. The system menu appears. Select Settings by turning cVd the COMAND controller and press W to confirm.
  • Page 38 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 36 d2irenkl Version: 3.0.3.6...
  • Page 39 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 37 d2irenkl Version: 3.0.3.6 Vehicle equipment ......38 Display settings ........38 Time settings ........38 Read-aloud settings ......39 Voice Control System settings ..40 ®...

  • Page 40: Vehicle Equipment

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 38 d2irenkl Version: 3.0.3.6 Time settings manually selecting day or night design or opt Vehicle equipment for an automatic setting. These Operating Instructions describe all Press the S button. standard and optional equipment available Select Settings by turning cVd the for your vehicle at the time of purchase.

  • Page 41: Read-Aloud Settings

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 39 d2irenkl Version: 3.0.3.6 Read-aloud settings The following navigation system functions Select Format and press W to confirm. require the time, time zone and summer/ The # symbols show the current settings. standard time to be set correctly in order Abbreviation Meaning...

  • Page 42: Voice Control System Settings

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 40 d2irenkl Version: 3.0.3.6 Voice Control System settings Select Settings by turning cVd the Individualization COMAND controller and press W to Introduction confirm. You can use the individualization function to Select Text Reader Speed and press W fine tune the Voice Control System to your to confirm.
  • Page 43 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 41 d2irenkl Version: 3.0.3.6 Voice Control System settings To close the display: press W the Canceling the first or second part of individualization COMAND controller. You hear a prompt asking whether you Confirm Cancel by pressing W the would like to train the system in numbers COMAND controller.

  • Page 44: Bluetooth ® Settings

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 42 d2irenkl Version: 3.0.3.6 ® Bluetooth settings Select Individualization On and press ® device has its own specific Bluetooth W to confirm. name. You have switched individualization on O ®...
  • Page 45 ® Bluetooth settings http://www.mbusa-mobile.com. Or call When called up again, the list may no the Mercedes-Benz Customer Assistance longer show all devices because, for Center at 1-800-FOR-MERCedes example, a device has been removed from (1-800-367-6372) (for the USA) or Customer the vehicle in the meantime.
  • Page 46 The device is authorized. De-authorizing (de-registering) a ® Bluetooth device External authorization Mercedes-Benz USA, LLC recommends that you de-authorize devices, e.g. mobile phones, If COMAND does not detect your both in COMAND and on the respective ® Bluetooth device, this may be due to ®...

  • Page 47: System Language Settings

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 45 d2irenkl Version: 3.0.3.6 Reset function Select Reset and press W to confirm. System language settings A prompt appears asking whether you wish to reset. This function allows you to determine the language for the menu displays and the Select Yes or No and press W to confirm.
  • Page 48 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 46 d2irenkl Version: 3.0.3.6...
  • Page 49 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 47 d2irenkl Version: 3.0.3.6 Vehicle equipment ......48 Introduction ......... 48 Basic settings ........50 Entering destinations ......51 Entering points of interest ....61 Route guidance ........66 Traffic reports ........

  • Page 50: Vehicle Equipment

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 48 d2irenkl Version: 3.0.3.6 Introduction Vehicle equipment priority over the navigation commands generated by the system. These Operating Instructions describe all Warning standard and optional equipment available for your vehicle at the time of purchase.
  • Page 51 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 49 d2irenkl Version: 3.0.3.6 Introduction The following entries are not possible, for example: entering the destination city and street entering a destination via the map entering in the vicinity of a city or via a name search editing entries direct entry using the number keypad...

  • Page 52: Basic Settings

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 50 d2irenkl Version: 3.0.3.6 Basic settings Basic settings Route mode Setting the route type and the route options You can select the following route types: Short Route: COMAND calculates a route with the shortest possible (minimized) distance without taking traffic reports into consideration.
  • Page 53 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 51 d2irenkl Version: 3.0.3.6 Entering destinations You can only enter those cities, streets, Entering destinations ZIP codes etc. that are stored in the digital Introduction to destination input map.

  • Page 54: Entering Destinations

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 52 d2irenkl Version: 3.0.3.6 Entering destinations Depending on the sequence in which you enter the address and on the data status of the digital map, some menu items may not be available at all or may not yet be available.
  • Page 55 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 53 d2irenkl Version: 3.0.3.6 Entering destinations Irrespective of the option, press W to confirm your selection. The address entry menu reappears. The street has now been entered. Entering the house number It is not possible to enter a house number until a street has been entered.
  • Page 56 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 54 d2irenkl Version: 3.0.3.6 Entering destinations Option 1 – no route guidance active: route calculation starts. While route calculation is in progress, an arrow will indicate the direction to your destination.
  • Page 57 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 55 d2irenkl Version: 3.0.3.6 Entering destinations cVd and sliding ZVÆ the COMAND controller and press W to confirm. Select Save as "My Address" and press W to confirm. COMAND stores your home address as My Address in the destination memory.
  • Page 58 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 56 d2irenkl Version: 3.0.3.6 Entering destinations address entry menu appears again. The ZIP code appears in place of the city's name. If COMAND cannot assign the ZIP code unambiguously to a specific address, the address entry menu also appears again.
  • Page 59 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 57 d2irenkl Version: 3.0.3.6 Entering destinations guidance. This entry always appears at the top of the list in the destination memory. To switch on navigation mode: press the g function button.
  • Page 60 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 58 d2irenkl Version: 3.0.3.6 Entering destinations Select From Last Destinations and Characters currently available for press W to confirm. selection Character bar Currently selected character To cancel an entry Destination memory list Option 2: destination memory list as selection list...
  • Page 61 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 59 d2irenkl Version: 3.0.3.6 Entering destinations Current vehicle position Select a destination by turning cVd the Crosshair COMAND controller and press W to confirm. Details of the crosshair position If the destination is within the limits of the Map scale selected digital map, COMAND attempts to assign...
  • Page 62 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 60 d2irenkl Version: 3.0.3.6 Entering destinations recalculates the route to the main If COMAND does not find any destinations, destination. you will see a message to this effect. Confirm OK by pressing W.
  • Page 63 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 61 d2irenkl Version: 3.0.3.6 Entering points of interest Select Destination in the navigation Selection Step system menu bar by turning cVd the Select a From Last COMAND controller and press W to Destinations destination from...
  • Page 64 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 62 d2irenkl Version: 3.0.3.6 Entering points of interest Option 2 Alphabetically sorted categories are available, as well as points of interest in the Enter an address in the address entry vicinity of the destination position arranged menu, e.g.

  • Page 65: Entering Points Of Interest

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 63 d2irenkl Version: 3.0.3.6 Entering points of interest Icon for main category To call up all entries in the RESTAURANT main category Main category list To call up all entries in the BREWPUB Option 2: main category list as selection subcategory list...
  • Page 66 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 64 d2irenkl Version: 3.0.3.6 Entering points of interest Selecting a point of interest subcategory of the RESTAURANT main category and which lie within the search Select a point of interest by turning cVd radius.
  • Page 67 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 65 d2irenkl Version: 3.0.3.6 Entering points of interest ® ZAGAT Survey service Entries with the Z icon contain additional ZAGAT information. ZAGAT evaluates restaurants, for example, in various ways with regard to the quality of the food, facilities, service and gives the average level of prices as well as a general description.
  • Page 68 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 66 d2irenkl Version: 3.0.3.6 Route guidance on the map varies according to the icon. Route guidance You can select the icons that COMAND will General notes display ( page 86).
  • Page 69 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 67 d2irenkl Version: 3.0.3.6 Route guidance e.g. roads closed to through traffic and non- Announcement phase residents. COMAND announces the imminent change of roads that have time restrictions (e.g. direction.
  • Page 70 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 68 d2irenkl Version: 3.0.3.6 Route guidance right announcement is made 90 ft. before Lane recommendations the change of direction. The display is split Overview into two halves, as in the announcement phase.

  • Page 71: Route Guidance

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 69 d2irenkl Version: 3.0.3.6 Route guidance Display and description of lane recommendations The colors used in the lane recommendation display vary, depending on whether day or night design is switched on.
  • Page 72 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 70 d2irenkl Version: 3.0.3.6 Route guidance Reducing volume during a navigation Navigation announcements announcement Repeating navigation announcements The volume of an active radio of video source Warning can be automatically reduced during a navigation announcement.
  • Page 73 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 71 d2irenkl Version: 3.0.3.6 Route guidance To start route guidance using the The length of the blockable route section selected alternative route: select Start is predetermined by the digital map. The and press W to confirm.
  • Page 74 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 72 d2irenkl Version: 3.0.3.6 Route guidance Route overview not be capable of traversing through without damaging your tires, wheels or vehicle. It is You can use the route overview to move along the driver’s sole responsibility to determine the route section by section and view the suitability of the route.
  • Page 75 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 73 d2irenkl Version: 3.0.3.6 Traffic reports If the vehicle reaches an area which is not part As soon as the vehicle is back on a road of the digital map, the display appears as a known to the system, route guidance split-screen view.
  • Page 76 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 74 d2irenkl Version: 3.0.3.6 Traffic reports To hide the menu: slide ZV the COMAND controller and, when the Full Screen menu item is shown, press W to confirm. The map can be seen in the full-screen display.
  • Page 77 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 75 d2irenkl Version: 3.0.3.6 Traffic reports Icon for real-time traffic reports Icon Description Traffic reports in the map display List of Traffic traffic reports reports Warning This appears at the beginning of the Entry type: Entry...
  • Page 78 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 76 d2irenkl Version: 3.0.3.6 Traffic reports Icon Description Traffic reports in the map display List of Traffic traffic reports reports Green Unimpeded No delays (Not (Not line with traffic flow available)

  • Page 79: Traffic Reports

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 77 d2irenkl Version: 3.0.3.6 Traffic reports Example: traffic report To show all reports: select Display All Messages by turning cVd the COMAND Depending on your selection: Read out controller and press W to confirm.
  • Page 80 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 78 d2irenkl Version: 3.0.3.6 Traffic reports Having traffic reports on the route read out Introduction The read-aloud function is only available while route guidance is active. It reads out traffic reports affecting the current route.
  • Page 81 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 79 d2irenkl Version: 3.0.3.6 Destination memory To show the menu: press W the COMAND page 51). Then, save the home address without starting route guidance controller. page 54).
  • Page 82 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 80 d2irenkl Version: 3.0.3.6 Destination memory then save the home address without starting route guidance. Select Home or Work and press W to confirm. In both cases, you will see the address book either with the character bar or as a selection list.

  • Page 83: Destination Memory

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 81 d2irenkl Version: 3.0.3.6 Destination memory After destination entry Selecting storage options To save the destination without a The destination has been entered and is shown in the address entry menu name: select Save Without Name and page 54).

  • Page 84: Last Destinations

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 82 d2irenkl Version: 3.0.3.6 Last destinations "Entering characters in navigation mode Select Destination in the navigation (entering a city)" section ( page 27). system menu bar by turning cVd the COMAND controller and press W to Then, select ¬...
  • Page 85 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 83 d2irenkl Version: 3.0.3.6 Last destinations store one destination from the list of previous Route guidance is active destinations in the destination memory. It will To show the menu: press W the COMAND be stored there permanently.

  • Page 86: Map Usage And Settings

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 84 d2irenkl Version: 3.0.3.6 Map usage and settings Select Yes or No and press W to confirm. Moving the map If you select Yes, the entry is deleted. Showing the crosshair If you select No, the process will be aborted.
  • Page 87 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 85 d2irenkl Version: 3.0.3.6 Map usage and settings The following display modes are possible: Centering the map on the vehicle or destination position 0 North orientation (the map view is displayed so that north is always up).
  • Page 88 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 86 d2irenkl Version: 3.0.3.6 Map usage and settings Select Standard Symbols, Personal Symbols or No symbols. If you select Personal Symbols, the list of points of interest appears. To switch the icon display on/off: select a point of interest by turning cVd the COMAND controller and press W to...
  • Page 89 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 87 d2irenkl Version: 3.0.3.6 Map usage and settings Road display Road display active Road names or numbers, e.g. for highways Select Arrival Time / Distance, Current Street, Geo-coordinates or Geo-coordinate display None and press W to confirm.
  • Page 90 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 88 d2irenkl Version: 3.0.3.6 Other settings "None" menu option Road sections are illustrated with a yellow line and arrows =. Speed & Flow Road sections are illustrated with yellow or red car icons :.

  • Page 91: Other Settings

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 89 d2irenkl Version: 3.0.3.6 Other settings To switch on navigation mode: press the To confirm the settings: press W. g function button. The list appears. The previously selected area to be avoided has been added and To show the menu: press W the COMAND activated.
  • Page 92 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 90 d2irenkl Version: 3.0.3.6 Other settings Select Display / Change and press W to Select Navi in the main function bar by sliding ZV and turning cVd the COMAND confirm.
  • Page 93 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 91 d2irenkl Version: 3.0.3.6 Other settings Select Off-road Route Memory Used and Select Highway Information and press press W to confirm. W to confirm. The memory used is shown as a Depending on the previous state, switch percentage.
  • Page 94 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 92 d2irenkl Version: 3.0.3.6 Other settings Select Position in the navigation system menu bar by sliding VÆ and turning cVd the COMAND controller and press W to confirm.
  • Page 95 Mercedes-Benz Center. You can have the You cannot eject the DVD during the digital map updated at the center with a DVD, update. If you switch off COMAND during or you can update the map yourself.

  • Page 96: Problems With The Navigation System

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 94 d2irenkl Version: 3.0.3.6 Problems with the navigation system Problems with the navigation system Problem Possible causes/consequences and M Solutions COMAND is unable to Route guidance is canceled if you interrupt the journey for more continue route than two hours.
  • Page 97 The navigation system will be operational until it has to access the faulty area of the hard drive again. The message will then reappear. Consult an authorized Mercedes-Benz Center. Problem Possible causes/consequences and M Solutions You will see a message The DVD containing the digital map cannot be used for the update.
  • Page 98 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 96 d2irenkl Version: 3.0.3.6...
  • Page 99 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 97 d2irenkl Version: 3.0.3.6 Vehicle equipment ......98 General information ......98 ® Telephony via the Bluetooth inter- face ............99 Reception and transmission volume 103 Using the telephone ......

  • Page 100: Vehicle Equipment

    COMAND on the Internet at you change from one transmitting/ http://www.mbusa-mobile.com. Or call receiving station (cell) to another and it the Mercedes-Benz Customer Assistance does not have a free channel. Center at 1-800-FOR-MERCedes (1-800-367-6372) for you use a SIM card which is not compatible the USA or at 1-800-387-0100 for Canada.

  • Page 101: Telephony Via The Bluetooth ® Interface

    COMAND on the Internet at available, you will not be able to make a http://www.mbusa-mobile.com. Or call "911" emergency call. If you attempt to the Mercedes-Benz Customer Assistance make an outgoing call, the No Service Center at message will appear for a short while.
  • Page 102 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 100 d2irenkl Version: 3.0.3.6 ® Telephony via the Bluetooth interface therefore recommended that you change Select Update and press W to confirm. this name so that you can easily recognize ®...
  • Page 103 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 101 d2irenkl Version: 3.0.3.6 ® Telephony via the Bluetooth interface Authorizing (registering) a mobile Now enter the same passcode in the mobile phone phone. To enter in the mobile phone: if the In the Bluetooth ®...
  • Page 104 De-registering (de-authorizing) a You can only switch to another authorized mobile phone mobile phone if no phone call is active. Mercedes-Benz USA, LLC recommends that ® Select the mobile phone in the Bluetooth you de-authorize devices both in COMAND telephones list by turning cVd the and on the respective mobile phone.

  • Page 105: Reception And Transmission Volume

    Once the mobile phone has been authorized, corresponding window in the display. you can optimize the transmission and reception volume settings. Find out more about the optimum settings for your mobile on the Internet at http://www.mbusa-mobile.com. Or call the Mercedes-Benz Customer Assistance Center at 1-800-FOR-MERCedes (1-800-367-6372)
  • Page 106 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 104 d2irenkl Version: 3.0.3.6 Using the telephone Enter the digits using the number pad. To connect the call: press the 6 button on COMAND or the K button on the multifunction steering wheel.
  • Page 107 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 105 d2irenkl Version: 3.0.3.6 Using the telephone Connecting a call to an entry on a call To switch off: select Mic Off and press list or in the COMAND phone book W to confirm.

  • Page 108: Using The Phone Book

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 106 d2irenkl Version: 3.0.3.6 Using the phone book characters in the character bar and press W to confirm. Press the corresponding button on COMAND's number keypad. Every character selected will be transmitted immediately.
  • Page 109 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 107 d2irenkl Version: 3.0.3.6 Using the phone book Select the characters of the entry you are Changing the character set of the character bar searching for one by one and press W to confirm.
  • Page 110 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 108 d2irenkl Version: 3.0.3.6 Using the phone book To return to the phone book with Creating a new entry in the phone character bar: select Back in the list and book press W to confirm.

  • Page 111: Using Call Lists

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 109 d2irenkl Version: 3.0.3.6 Using call lists Select Yes or No and press W to confirm. If you select Yes, a selection list will appear containing the five existing numbers. If you select No, the process will be aborted.
  • Page 112 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 110 d2irenkl Version: 3.0.3.6 Using call lists Select Incoming Calls or Calls Storing a phone number which has Dialed using cVd and press W to not yet been stored confirm.
  • Page 113 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 111 d2irenkl Version: 3.0.3.6 Using call lists Select Save and press W to confirm. Select Save. The search menu for address book entries An input menu appears with data fields. The appears.
  • Page 114 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 112 d2irenkl Version: 3.0.3.6 Using the address book Using the address book Introduction Warning! Please devote your attention first and foremost to the traffic situation you are in. Before your journey, please familiarize yourself with the address book functions.
  • Page 115 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 113 d2irenkl Version: 3.0.3.6 Using the address book Search menu with character bar Input menu with data fields ¥ icon for address book entry Selected data field with cursor ¤...
  • Page 116 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 114 d2irenkl Version: 3.0.3.6 Using the address book To close the detailed display: press the Displaying details about an address k button. book entry Selecting an entry Changing an address book entry Search for an address book entry and turn cVd the COMAND controller to select it in...

  • Page 117: Using The Address Book

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 115 d2irenkl Version: 3.0.3.6 Using the address book Changing the category of a telephone Option 2 number data field Display the detailed view for an address Display the detailed view for an address book entry.
  • Page 118 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 116 d2irenkl Version: 3.0.3.6 Using the address book Subsequent operation will depend on how Select Delete and press W to confirm. complete the address data items are and A deletion prompt appears.
  • Page 119 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 117 d2irenkl Version: 3.0.3.6 Using the address book COMAND controller and press W to confirm. Select Download Contacts and press W to confirm. A menu appears. Select an entry by turning cVd the COMAND controller and press W to confirm.
  • Page 120 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 118 d2irenkl Version: 3.0.3.6...
  • Page 121 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 119 d2irenkl Version: 3.0.3.6 Vehicle equipment ......120 Radio mode ........120 SatRadio ..........123 Audio CD/DVD and MP3 mode ..127 MUSIC REGISTER ......138 Media Interface mode ......

  • Page 122: Vehicle Equipment

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 120 d2irenkl Version: 3.0.3.6 Radio mode Vehicle equipment These Operating Instructions describe all standard and optional equipment available for your vehicle at the time of purchase. Please note that your vehicle may not be equipped with all features described.
  • Page 123 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 121 d2irenkl Version: 3.0.3.6 Radio mode turning cVd the COMAND controller and Switching wavebands press W to confirm. Option 1 You can switch the radio between the FM, AM Press W the COMAND controller when the and WB waveband.
  • Page 124 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 122 d2irenkl Version: 3.0.3.6 Radio mode manually in the preset memory will be lost. It Storing a station is possible that COMAND does not fill all Storing stations manually memory slots when storing.

  • Page 125: Satradio

    The channel list appears. environmental or topographical conditions as well as other issues beyond the control of Mercedes-Benz USA, LLC. Operation may also be impaired in certain locations (e.g. tunnels, parking garages or within as well as close to buildings).
  • Page 126 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 124 d2irenkl Version: 3.0.3.6 SatRadio details will be required to activate your Registering satellite radio account. Switch on satellite radio mode If the satellite receiver is not installed or is page 124).
  • Page 127 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 125 d2irenkl Version: 3.0.3.6 SatRadio Channel information A can be viewed in Select Audio by sliding ZV the COMAND controller and press W to confirm. detail ( page 127).
  • Page 128 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 126 d2irenkl Version: 3.0.3.6 SatRadio Memory functions Storing channels There are ten presets available. Press W the COMAND controller when the display/selection window is active. Select Presets in the submenu bar by turning cVd the COMAND controller and press W to confirm.
  • Page 129 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 127 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode Displaying information Select Info in the submenu bar by turning cVd the COMAND controller and press W to confirm. Information on the currently received program is displayed.
  • Page 130 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 128 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode To insert a CD/DVD into the magazine all maintenance work must be carried out by tray: press the 8 load/eject button. qualified aftersales technicians.
  • Page 131 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 129 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode The DVD changer loads the disc into the Insert a disc into the disc slot with the selected magazine tray.
  • Page 132 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 130 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode Select a magazine tray containing a disc by Confirm Eject All by pressing W. turning cVd the COMAND controller and The DVD changer ejects the last disc press W to confirm.

  • Page 133: Audio Cd/Dvd And Mp3 Mode

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 131 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode Inserting a PCMCIA memory card Switching to CD/audio DVD or MP3 mode Option 1 Insert a CD/DVD ( page 128)or a PCMCIA memory card ( page 131).
  • Page 134 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 132 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode Example display in audio CD mode CD or DVD inserted Track name (only if stored on the disc as CD text) Track time Visual time and track display...
  • Page 135 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 133 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode To stop playback: while playback is Pause function interrupted, select ± again and press W In audio CD/DVD and MP3 mode to confirm.
  • Page 136 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 134 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode COMAND controller and press W to Media list confirm. Magazine trays, positions 1 to 6: readable data media are audio CDs, MP3 CDs or MP3 Press W the COMAND controller in MP3 DVDs, audio DVDs and video DVDs.
  • Page 137 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 135 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode Gracenote Media Database Introduction This function is only available in audio CD mode. There is a version of the software from ®...
  • Page 138 Normal Track Sequence Information about new versions can be You will hear the tracks in the normal order obtained from an authorized Mercedes-Benz (e.g. track 1, 2, 3, etc.). Center. In MP3 mode, playback proceeds in the...
  • Page 139 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 137 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode To select options: switch on audio CD/ File structure of a disc DVD or MP3 mode ( page 131).

  • Page 140: Music Register

    An error in COMAND might result compatible with the audio CD standard and in the loss of the music files stored in the therefore may not be able to be played by MUSIC REGISTER. Mercedes-Benz is not COMAND. liable for any loss of data.
  • Page 141 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 139 d2irenkl Version: 3.0.3.6 MUSIC REGISTER Switching to the MUSIC REGISTER Option 1 Press the e function button. This switches to the last disc mode selected (CD/audio DVD/video DVD/ MP3).
  • Page 142 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 140 d2irenkl Version: 3.0.3.6 MUSIC REGISTER First step: selecting the tracks for If you do not select a target folder, a new recording target folder is created. Select the Track by turning cVd the Third step: start recording COMAND controller and press W to...
  • Page 143 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 141 d2irenkl Version: 3.0.3.6 MUSIC REGISTER If you select No, the process will be aborted. Calling up memory space info Select Music Register by sliding VÆ and turning cVd the COMAND controller and press W to confirm.
  • Page 144 Subclass 6 is available from the equipment manufacturer. Connection options For further details and a list of supported Overview devices, visit http://www.mbusa- mobile.com. Or call the Mercedes-Benz You will find the connection sockets in the Customer Assistance Center at glove box. 1-800-FOR-MERCedes (1-800-367-6372)

  • Page 145: Media Interface Mode

    (Please make sure that only one functionality (see the operating device is connected). instructions for the respective device). the connected device consumes too much Mercedes-Benz USA, LLC does not take power. responsibility for any damage to external the Media Interface connection is faulty. devices.
  • Page 146 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 144 d2irenkl Version: 3.0.3.6 Media Interface mode Select Audio by sliding ZV and turning Current playback settings (no icon for cVd the COMAND controller and press "Normal track sequence") W to confirm.
  • Page 147 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 145 d2irenkl Version: 3.0.3.6 Media Interface mode the entire content of the category selected COMAND will ignore and not display an will be played. invalid digit. If desired, enter further digits.
  • Page 148 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 146 d2irenkl Version: 3.0.3.6 Media Interface mode To select one folder higher: select the U icon and confirm with W. The U icon is always shown right at the top of the respective folder.
  • Page 149 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 147 d2irenkl Version: 3.0.3.6 Media Interface mode the version and language variant of the Playback options ® software (e.g. iTunes version) used to The following options are available to you: populate the device.

  • Page 150: Audio Aux Mode

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 148 d2irenkl Version: 3.0.3.6 Audio AUX mode Do not use a USB extension cable or an Select Audio in the main function bar by adapter. These may impair functionality. sliding ZV and turning cVd the COMAND controller and press W to confirm.
  • Page 151 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 149 d2irenkl Version: 3.0.3.6 Audio AUX mode Select Volume in the AUX display by turning cVd the COMAND controller and press W to confirm. A menu appears. The # dot indicates the current setting.
  • Page 152 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 150 d2irenkl Version: 3.0.3.6...
  • Page 153 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 151 d2irenkl Version: 3.0.3.6 Vehicle equipment ......152 General information ......152 Basic settings ........152 DVD video mode ....... 152...
  • Page 154 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 152 d2irenkl Version: 3.0.3.6 DVD video mode Changing the picture format Vehicle equipment Press W the COMAND controller to show These Operating Instructions describe all the menu. standard and optional equipment available Select DVD-Video by sliding VÆ...
  • Page 155 Notes on discs factory. This setting can be changed at an There may be playback problems when authorized Mercedes-Benz Center. This will playing copied discs. There are a large variety allow you to play video DVDs with a of discs, DVD authoring software, writing different region code, provided that they software and writers available.
  • Page 156 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 154 d2irenkl Version: 3.0.3.6 DVD video mode If not, you can switch on video DVD mode Track time as follows: To show the menu Select Media by sliding VÆ and turning cVd the COMAND controller and press W to confirm.
  • Page 157 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 155 d2irenkl Version: 3.0.3.6 DVD video mode Selecting a video DVD Stop function Press W the COMAND controller to show Press W the COMAND controller to show the menu.
  • Page 158 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 156 d2irenkl Version: 3.0.3.6 DVD video mode Scene/chapter selection may also be DVD menu possible from the DVD menu stored on the Calling up the DVD menu DVD itself.
  • Page 159 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 157 d2irenkl Version: 3.0.3.6 DVD video mode Make a selection from the further options, Select the Back (to movie) menu item in if necessary. the menu and press W to confirm. COMAND then switches back to the DVD menu.
  • Page 160 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 158 d2irenkl Version: 3.0.3.6 DVD video mode Select DVD Functions and press W to confirm. Select Subtitles or Camera Angle and press W to confirm. In both cases, a menu appears. The # dot in front of an entry indicates the current setting.
  • Page 161 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 159 d2irenkl Version: 3.0.3.6 Vehicle equipment ......160 General information ......160 Basic functions ......... 167 System settings ........ 168 Audio CD/DVD and MP3 mode ..169 DVD video mode .......

  • Page 162: Vehicle Equipment

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 160 d2irenkl Version: 3.0.3.6 General information Vehicle equipment Warning Due to a potential choking hazard, wired These Operating Instructions describe all headset usage by children should only occur standard and optional equipment available with adult supervision.
  • Page 163 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 161 d2irenkl Version: 3.0.3.6 General information Rear-compartment screens Socket for wired headphones AUX jacks Display Infrared receiver diodes...
  • Page 164 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 162 d2irenkl Version: 3.0.3.6 General information Selecting a screen for remote operation Remote control The remote control allows you to operate one Overview of the two rear-compartment screens. To do so, you will need to switch the remote control to the corresponding screen.
  • Page 165 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 163 d2irenkl Version: 3.0.3.6 General information Switching the sound on/off (wired headphones only) Press button B on the remote control. The sound is switched on/off. Selecting a menu/menu item and confirming your selection Select a menu/menu item using the =;9: buttons and press...
  • Page 166 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 164 d2irenkl Version: 3.0.3.6 General information Wireless headphones Overview Vehicles intended for sale in the USA are equipped with wireless headphones. Wired headphones are available for the Canadian and other markets. Volume control To select a screen for the headphones Battery tray cover...
  • Page 167 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 165 d2irenkl Version: 3.0.3.6 General information Selecting a screen for the headphones Move push slider ; to L (left-hand screen) or R (right-hand screen). Indicator lamp, displays The color of the indicator lamp shows whether the headphones are switched on or off and indicates the charge level of the...
  • Page 168 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 166 d2irenkl Version: 3.0.3.6 General information In the remote control Insert new batteries. Observe the polarity marking on the batteries and in the battery compartment when doing so. Left-hand battery: the positive pole (+) must face upwards.

  • Page 169: Basic Functions

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 167 d2irenkl Version: 3.0.3.6 Basic functions Right-hand battery: the positive pole (+) The headphones' volume setting does not must face downwards. affect the main loudspeakers. To close the battery compartment: press the battery compartment lid Adjusting the sound settings downwards until it clips into place.

  • Page 170: System Settings

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 168 d2irenkl Version: 3.0.3.6 System settings The following functions affect only one Select Brightness, Contrast or Color screen: using the 9: buttons and press the 9 button to confirm. audio and video functions as well as picture A setting scale appears.

  • Page 171: Audio Cd/Dvd And Mp3 Mode

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 169 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode Setting the brightness Select System Settings using the : button and press the 9 button to confirm. Select Brightness using the 9: buttons and press the 9 button to confirm.
  • Page 172 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 170 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode The CD/DVD drive plays the disc if: General notes it has been inserted correctly and it is a You will find information on the following permissible type.
  • Page 173 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 171 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode Track name (only if stored on the disc as CD text) Track time Visual time and track display Current playback settings (no icon for "Normal track sequence") To adjust the bass...
  • Page 174 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 172 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode If the Random Tracks or Random Folder Fast forward/rewind playback option has been selected, the While the display/selection window is track order is random.
  • Page 175 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 173 d2irenkl Version: 3.0.3.6 Audio CD/DVD and MP3 mode To interrupt playback: select ± using the :=; buttons on the remote control and press the 9 button to confirm. The «...
  • Page 176 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 174 d2irenkl Version: 3.0.3.6 DVD video mode Select CD, DVD-A or MP3 using DVD playback conditions the :=; buttons on the remote There may be playback problems when control and press the 9 button to confirm.
  • Page 177 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 175 d2irenkl Version: 3.0.3.6 DVD video mode the DVD menu appears, you will need to start the film manually. Select the corresponding menu item in the DVD menu.

  • Page 178: Dvd Video Mode

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 176 d2irenkl Version: 3.0.3.6 DVD video mode Option 1: while the film is playing, press Stop function the h button on the remote control. To show the menu: press the 9 button Press the corresponding number key, such on the remote control.
  • Page 179 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 177 d2irenkl Version: 3.0.3.6 DVD video mode Select DVD Functions and press the 9 button to confirm. Select Title Selection and press the 9 button to confirm. To call up the selection list: press the 9 button.

  • Page 180: Aux Mode

    ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 178 d2irenkl Version: 3.0.3.6 AUX mode Option 2: select any menu item in the DVD Subtitles and camera angle menu. These functions are not available on all DVDs. Select the Go Up menu item in the menu The number of subtitle languages and camera and press the 9 button to confirm.
  • Page 181 For further details concerning external video sources, please consult an authorized Mercedes-Benz Center. AUX menu Select Source from the AUX menu and Connecting auxiliary equipment press the 9 button to confirm.
  • Page 182 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 180 d2irenkl Version: 3.0.3.6 AUX mode Selecting the active COMAND source In the status bar at the top, you will see the headphones icon and the _ icon for the Select Aux in the menu using the source that has been switched on.
  • Page 183 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 181 d2irenkl Version: 3.0.3.6 AUX mode Changing the picture format Select Source in the AUX menu and press the 9 button on the remote control to confirm.
  • Page 184 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 182 d2irenkl Version: 3.0.3.6...
  • Page 185 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 183 d2irenkl Version: 3.0.3.6 Vehicle equipment ......184 Overview ..........184 Emergency calls ........ 184 Roadside assistance ......184 Telephone inquiries ......185 Search & Send ........185...
  • Page 186 Press and hold the F Roadside Assistance button for at least two seconds. A call to the Mercedes-Benz Roadside Assistance center is initiated. The button flashes while the call is in progress. In Canada, mbrace is referred to as Tele Aid.
  • Page 187 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 185 d2irenkl Version: 3.0.3.6 Search & Send Complete details and additional information Selecting and sending a destination on Roadside Assistance can be found in the address vehicle Operator's Manual.
  • Page 188 The destination addresses are downloaded in the same order as they are sent. If you own several Mercedes-Benz vehicles equipped with an mbrace subscriber account, each destination address can be downloaded by each vehicle associated with the e-mail address registered for your mbrace account.
  • Page 189 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 187 d2irenkl Version: 3.0.3.6...
  • Page 190 ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US 2010-05-31T09:21:57+02:00 - Seite 188 d2irenkl Version: 3.0.3.6...

Table of Contents