Mercedes-Benz COMAND MY11 Operating Instructions Manual page 66

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Entering points of interest
64
subcategory of the RESTAURANT main
category and which lie within the search
radius.
Point of interest list
Introduction
The illustration below shows an example of
the points of interest list for the
RESTAURANT main category and BREWPUB
subcategory in the vicinity of the current
position.
Point of interest
:
Compass heading to the point of interest
;
Linear distance to the point of interest
=
Selected category or subcategory
?
i
Depending on the point of interest
selected, COMAND uses different
reference points in determining the linear
distance to the destination:
vicinity of current position: the linear
R
distance is the distance of the point of
interest from the current vehicle
position.
vicinity of destination: the linear distance
R
is the distance of the point of interest
from the destination entered.
2010-05-31T09:21:57+02:00 - Seite 64
Version: 3.0.3.6
Selecting a point of interest
Select a point of interest by turning cVd
X
the COMAND controller and press W to
confirm.
The full address of the point of interest
selected appears.
Point of interest with address
:
To start route calculation
;
To store an address in the destination
=
memory
To display details
?
To make a call (when available)
A
To cancel selection
B
To show an address on the map
C
To start route calculation: select Start
X
and press W to confirm.
To store an address in the destination
X
memory: select Save and press W to
confirm. You can now select storage
options ( page 81).
Y
To show the detailed view: select
X
Details and press W to confirm.
To connect a call: select Call and press
X
W to confirm (available if the point of
interest entry contains a phone number).
COMAND switches to telephone mode
( page 105).
Y
To call up the map: select Map and press
X
W to confirm.
You can move the map and select the
X
destination ( page 59).
Y