Mercedes-Benz COMAND MY11 Operating Instructions Manual page 33

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
To change the language of the
X
character bar: select B and press W
to confirm.
Select the language by turning cVd the
X
COMAND controller and press W to
confirm.
To reposition the cursor within the data
X
field: select 2 or 3 and press W to
confirm.
Cursor (repositioned)
:
2 and 3 icon to reposition the cursor
;
Delete the character/entry (
X
Basic functions of COMAND
Switching COMAND on/off
Press the q control knob.
X
The cover folds open and the COMAND
display extends. A warning message
appears. COMAND calls up the previously
selected menu.
i
If you switch off COMAND, playback of
the current audio or video source will also
be switched off.
2010-05-31T09:21:57+02:00 - Seite 31
Version: 3.0.3.6
Basic functions of COMAND
Muting
Switching an audio and video source
on/off
Press the B button on COMAND or on the
X
multifunction steering wheel.
The sound from the respective audio or
video source is switched on or muted.
i
When the sound is off, the system
displays the , symbol in the status line.
When you change the audio or video
source, or adjust the volume, the sound
automatically switches on again.
i
You will still hear traffic announcements
and navigation system announcements,
even if the sound is muted.
Switching off navigation
announcements completely
Navigation announcements: press the
X
B button during the announcement.
page 28).
Y
Switching navigation announcements
back on
Press the B button again.
X
i
The navigation announcements are
switched on again if you start a new route
guidance or if COMAND is switched off and
on with the q control knob.
Adjusting the volume
Adjusting the volume for the audio or
video source
Turn the q control knob.
X
or
Press the W or X button on the
X
multifunction steering wheel.
The volume of the currently selected audio
or video source changes.
31
Z