Mercedes-Benz COMAND MY11 Operating Instructions Manual page 103

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Authorizing (registering) a mobile
phone
In the Bluetooth
X
not yet authorized mobile phone by turning
cVd the COMAND controller.
Select Options by sliding VY the
X
COMAND controller and press W to
confirm.
Select Authorize and press W to confirm.
X
The passcode entry menu appears.
The passcode is any one to sixteen-digit
number combination which you can
determine yourself. You must enter the same
number combination in COMAND and in the
®
Bluetooth -capable mobile phone (see the
operating instructions of the mobile phone).
i
Some mobile phones require the input of
a four-digit passcode or longer character
strings.
If you want to re-authorize a mobile phone
following de-authorization, you can select a
different passcode.
To enter a passcode in COMAND: press
X
the number keys in turn.
¬ is highlighted after the first number
has been entered.
or
Select the digits one by one by turning
X
cVd the COMAND controller and press
W to confirm. Then, select ¬.
To confirm an entry in COMAND: press
X
W the COMAND controller.
Telephony via the Bluetooth
® telephones list, select the
2010-05-31T09:21:57+02:00 - Seite 101
Version: 3.0.3.6
Now enter the same passcode in the mobile
X
phone.
To enter in the mobile phone: if the
®
Bluetooth connection is successful, you will
be prompted by the mobile phone to enter the
passcode (see the mobile phone operating
instructions).
Enter the same passcode in the mobile
X
phone as already entered in COMAND.
i
After entering the passcode, you may also
need to enter a confirmation in your mobile
phone to connect calls. Check the display
of your mobile phone.
If the COMAND display shows the
Authorization Procedure
Unsuccessful message, you may have
exceeded the prescribed time period.
Repeat the procedure.
The mobile phone is connected to COMAND
(authorized). You can now make calls using
the COMAND hands-free system.
External authorization
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. In this case,
check whether your mobile phone can find
COMAND. The Bluetooth
COMAND is MB Bluetooth.
Observe the following: some mobile phones
require that you reconnect to COMAND after
you have entered the passcode (see the
mobile phone operating instructions). The
mobile phone cannot otherwise be
authorized.
Press the ÷ function button on COMAND.
X
Select Phone in the telephone basic menu
X
by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
Select Bluetooth Phones and press W to
X
confirm.
Select Update.
X
®
interface
101
®
device name of
Z