Mercedes-Benz COMAND MY11 Operating Instructions Manual page 73

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
i
The length of the blockable route section
is predetermined by the digital map. The
menu items are available accordingly.
To start route calculation: select Start
X
and press W to confirm.
To delete the blocked section: select
X
Delete while the message is shown and
press W to confirm.
COMAND calculates the route without the
block.
Selecting an alternative route
With the "Alternative route" function, routes
other than the original one can be calculated.
To switch on navigation mode: press the
X
g function button.
To show the menu: press W the COMAND
X
controller.
Select Route in the navigation system
X
menu bar by turning cVd the COMAND
controller and press W to confirm.
Select Alternative Route and press W
X
to confirm.
You see the selected route. The display now
shows a split-screen view. On the left-hand
side, one or more alternative routes are
shown from start to destination. The
current route is highlighted dark blue; other
alternative routes appear light blue.
On the right-hand side, information on the
currently selected alternative route is
shown, e.g. length of route, estimated
driving time and estimated time of arrival.
To select the next or previous
X
alternative route: select Next or
Previous and press W to confirm.
The selected route is highlighted dark blue.
To select the original route: select Back
X
a corresponding number of times and press
W to confirm.
2010-05-31T09:21:57+02:00 - Seite 71
Version: 3.0.3.6
Route guidance
To start route guidance using the
X
selected alternative route: select Start
and press W to confirm.
COMAND calculates the alternative route.
Displaying destination information
You have entered a destination (
or a point of interest ( page 61) and possibly
Y
an intermediate stop ( page 59).
Y
To switch on navigation mode: press the
X
g function button.
To show the menu: press W the COMAND
X
controller.
Select Route in the navigation system
X
menu bar by turning cVd the COMAND
controller and press W to confirm.
Select Destination Information and
X
press W to confirm.
Destination information is displayed.
Example display: destination information
Distance, estimated time of arrival and
:
estimated remaining driving time to
intermediate stop
Intermediate stop P
;
State and city
=
Destination O
?
Distance, estimated time of arrival and
A
estimated driving time to destination
To close the destination information:
X
slide XVY the COMAND controller or press
the k back button.
71
page 51)
Y
Z