Mercedes-Benz COMAND MY11 Operating Instructions Manual page 78

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Traffic reports
76
Icon Description
Green Unimpeded
line with traffic flow
arrows
Red line Warning
with message
arrows
Displaying real-time traffic reports
To switch on navigation mode: press the
X
Ø function button.
To show the menu: press W the COMAND
X
controller.
Select Traffic by turning cVd the
X
COMAND controller and press W to
confirm.
If the dialog field shows the No Traffic
Messages message, this means that:
no traffic reports have been received yet.
R
no traffic reports are available.
R
To cancel the search: select Cancel and
X
press W to confirm.
To close the report window: select OK
X
and press W to confirm.
If traffic reports exist, a list is shown.
The content of the list varies depending on
whether route guidance is active or not.
List when route guidance is not active
The list shows all the roads, areas or regions
for which reports are available.
Traffic reports in the map display
No delays
Only appears on the side of the road
(direction of travel) on which traffic
flow is unimpeded
Incident on road
Appears on the side of the road
affected (direction of travel)
A traffic report may refer to an area or a
region, e.g. if visibility is impaired due to fog.
To read a traffic report: select a road,
X
area or region by turning cVd the
COMAND controller and press W to
confirm.
List when route guidance is active
The first list shows the roads, areas and
regions that lie along the route and for which
traffic reports are available.
2010-05-31T09:21:57+02:00 - Seite 76
Version: 3.0.3.6
List of
traffic
reports
(Not
available)
(Not
available)
Traffic
reports
(Not
available)
(Not
available)