Mercedes-Benz COMAND MY11 Operating Instructions Manual page 128

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
SatRadio
126
Entering channel numbers directly
Option 1
Press the õ button.
X
An input menu appears.
Option 2
Select Sat Radio in the submenu bar by
X
turning cVd the COMAND controller and
press W to confirm.
Select Enter Channel and press W to
X
confirm.
An input menu appears.
To enter a channel: irrespective of the
X
option, press the corresponding number
keys on the control panel one after the
other.
COMAND sets the selected channel.
i
You can only select currently permitted
digits.
Selecting a channel from the SatRadio
channel list
Select Sat Radio in the submenu bar by
X
turning cVd the COMAND controller and
press W to confirm.
Select Channel List and press W to
X
confirm.
The channel list appears.
Select a channel by turning cVd the
X
COMAND controller and press W to
confirm.
2010-05-31T09:21:57+02:00 - Seite 126
Version: 3.0.3.6
Memory functions
Storing channels
i
There are ten presets available.
Press W the COMAND controller when the
X
display/selection window is active.
or
Select Presets in the submenu bar by
X
turning cVd the COMAND controller and
press W to confirm.
In both cases, the channel presets appear.
The R dot in front of a preset position
indicates that the currently selected
channel is stored there.
Channel presets
Select a preset by turning cVd the
X
COMAND controller and press and hold
W until you hear a tone.
or
Press and hold a number button, e.g. 4,
X
until you hear a tone.
The channel is stored under the preset.
Selecting a channel from the preset list
To call up the channel list: select
X
Presets by turning cVd the COMAND
controller and press W to confirm.
The channel preset list appears.
To set a channel: select a preset by
X
turning cVd the COMAND controller and
press W to confirm.
or
Press a number key, e.g. 4.
X