Mercedes-Benz COMAND MY11 Operating Instructions Manual page 124

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Radio mode
122
Storing a station
Storing stations manually
There are ten presets available for the FM and
AM wavebands.
Quick save: press and hold a number key,
X
e.g. H, until you hear a tone.
The station is stored.
To store directly in the station presets:
X
press W the COMAND controller when the
display/selection window in the radio
display is active.
or
Select Presets by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
In both cases, the station presets appear.
The # dot indicates under which preset
the currently selected station is stored.
Example display: station presets
Select a preset by turning cVd the
X
COMAND controller and press and hold
W until you hear a tone.
The station is stored under the preset.
Storing stations automatically
This function automatically stores stations
with adequate reception. The search starts at
the lowest frequency. If stations are found,
COMAND stores them starting at memory
slot 1. Storing is complete when the highest
frequency has been reached or when 10
stations have been found. Stations stored
2010-05-31T09:21:57+02:00 - Seite 122
Version: 3.0.3.6
manually in the preset memory will be lost. It
is possible that COMAND does not fill all
memory slots when storing.
Option 1: press W the COMAND controller
X
when the display/selection window is
active.
The station preset menu appears.
Option 2: select Presets by sliding VÆ
X
and turning cVd the COMAND controller
and press W to confirm.
The station preset menu appears.
Irrespective of the option, select
X
Autostore and press W to confirm.
In both cases, COMAND searches for
stations that can be received. You will see
a message to this effect. The available
stations are automatically stored in the
preset positions.
To cancel storing: select Cancel and
X
press W to confirm.
Weather Band
Switching to
Press the ó function button repeatedly
X
until the Weather Band is switched on.
or
Select WB by sliding VÆ and turning cVd
X
the COMAND controller and press W to
confirm.
Display window with channel settings
:
Currently received channel
;