Mercedes-Benz COMAND MY11 Operating Instructions Manual page 135

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Pause function
In audio CD/DVD and MP3 mode
To pause playback: briefly press B.
X
The , display is at the top left of the
status bar.
To continue playback: briefly press the
X
B button again.
The , display goes out.
Only in audio DVD mode
To pause playback: switch on audio DVD
X
mode ( page 131).
Y
Select « by sliding VÆ and turning cVd
X
the COMAND controller and press W to
confirm.
The « display changes to M.
To continue playback: select M and press
X
W to confirm.
Playback continues from the point where it
was interrupted. The M display changes to
«.
Stop function
This function is only available in audio DVD
mode.
Switch on audio DVD mode (
X
To interrupt playback: select ± by
X
sliding VÆ and turning cVd the COMAND
controller and press W to confirm.
The « display changes to M. The ± icon
remains highlighted.
To continue playback: select M and press
X
W to confirm.
Playback continues from the point where it
was interrupted.
2010-05-31T09:21:57+02:00 - Seite 133
Version: 3.0.3.6
Audio CD/DVD and MP3 mode
To stop playback: while playback is
X
interrupted, select ± again and press W
to confirm.
or
Select ± and confirm by pressing W twice
X
in rapid succession.
The selection marker is at M.
To restart playback: select M and press
X
W to confirm.
Playback starts at the beginning of the
DVD.
Selecting CD/audio DVD/MP3 discs
Selecting via the media list
In CD/audio DVD and MP3 mode: select
X
Media by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
or
In CD/audio DVD mode only: press W
X
the COMAND controller when the display/
selection window is active.
The media list appears. The # dot
indicates the current medium being played.
page 131).
Y
Media list
The media list shows the discs currently
available.
133
Z