Destination Memory - Mercedes-Benz COMAND MY11 Operating Instructions Manual

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
After destination entry
The destination has been entered and is
X
shown in the address entry menu
( page 54).
Y
Select Save by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
You can now select storage options
( page 81).
Y
During route guidance
To show the menu: press W the COMAND
X
controller.
Select Destination in the navigation
X
system menu bar by turning cVd the
COMAND controller and press W to
confirm.
Select Save Destination and press W to
X
confirm.
You can now select storage options
( page 81).
Y
From the list of previous destinations
To show the menu: press W the COMAND
X
controller.
Select Destination in the navigation
X
system menu bar by turning cVd the
COMAND controller and press W to
confirm.
Select From Last Destinations and
X
press W to confirm.
The list of previous destinations appears.
Select a destination by turning cVd the
X
COMAND controller and press W to
confirm.
The destination address is shown.
Select Save and press W to confirm.
X
You can now select storage options.
2010-05-31T09:21:57+02:00 - Seite 81
Version: 3.0.3.6

Destination memory

Selecting storage options
To save the destination without a
X
name: select Save Without Name and
press W to confirm.
COMAND stores the destination in the
destination memory and uses the address
as the destination name.
To save the destination as My address:
X
select Save as "My Address" and press
W to confirm.
COMAND stores the destination in the
destination memory as My Address. If the
selected address book entry already
contains address data that can be used for
navigation (L icon), a prompt will appear
asking whether you wish to overwrite the
existing data.
Select Yes or No and press W to confirm.
X
If you select Yes, the entry is overwritten.
If you select No, the process will be aborted.
To save the destination with a name:
X
select Save With Name and press W to
confirm.
Select a category, e.g. Home, and press W
X
to confirm.
The input menu appears with data fields
and the character bar.
Example display: saving a destination with a name
Selected data field with cursor
:
Character bar
;
Proceed as described under "Entering
X
characters using the character bar" in the
81
Z