Mercedes-Benz COMAND MY11 Operating Instructions Manual page 87

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Centering the map on the vehicle or
destination position
Centering the map on the vehicle
position
To show the menu: press W the COMAND
X
controller.
Select Position in the navigation system
X
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
Select Vehicle Position Map and press
X
W to confirm or, if the crosshair is shown,
press the k back button.
This hides the crosshair.
Centering on the destination
This function requires that a route to a
destination has been calculated.
To show the menu: press W the COMAND
X
controller.
Select Position in the navigation system
X
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
Select Destination Position Map and
X
press W to confirm.
The crosshair is centered on the
destination.
Map display
Setting the map orientation
Map orientation
Currently set map orientation
:
2010-05-31T09:21:57+02:00 - Seite 85
Version: 3.0.3.6
Map usage and settings
The following display modes are possible:
0 North orientation (the map view is
R
displayed so that north is always up).
¤ Orientation in the direction of travel (the
R
map is displayed so that the heading is
always up; the orange point of the icon
points north).
¤ Bird's-eye view (the map is displayed so
R
that the heading is always up, the map
projection reproduces the curvature of the
earth, the orange point of the icon points
north)
Example display: Bird's-eye view
Current crosshair position
:
Current map orientation
;
To show the menu: press W the COMAND
X
controller.
Select Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select Map Display and press W to
X
confirm.
A # dot indicates the current setting.
85
Z