Mercedes-Benz COMAND MY11 Operating Instructions Manual page 43

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
To close the display: press W the
X
COMAND controller.
You hear a prompt asking whether you
would like to train the system in numbers
or in voice commands.
At the end of the first part, you will see a
prompt asking whether you wish to begin the
second part.
Select Yes or No and press W to confirm.
X
If you select No, individualization will be
canceled. The data from the first part is
stored automatically.
If you select Yes, the second part will begin.
Individualization is completed at the end of
the second part. You will see a message to
this effect. The data from the second part is
stored automatically.
2010-05-31T09:21:57+02:00 - Seite 41
Version: 3.0.3.6
Voice Control System settings
Canceling the first or second part of
individualization
Confirm Cancel by pressing W the
X
COMAND controller.
A prompt appears asking whether you
really do wish to cancel.
Select Yes or No and press W to confirm.
X
If you select Yes, individualization will be
canceled. The data from the part canceled
is not stored.
If you select No, the current part begins
again.
Deleting existing individualization data
Press the S button.
X
Select Settings by turning cVd the
X
COMAND controller and press W to
confirm.
Select Linguatronic and press W to
X
confirm.
Select Delete Individualization and
X
press W to confirm.
A prompt appears asking whether you
really wish to delete.
Select Yes or No and press W to confirm.
X
If you select No, the process will be aborted.
If you select Yes, the individualization is
deleted. You will see a message to this
effect.
Activating/deactivating
individualization
Press the S button.
X
Select Settings by turning cVd the
X
COMAND controller and press W to
confirm.
Select Linguatronic and press W to
X
confirm.
41