Mercedes-Benz Comand MY11 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Mercedes-Benz Manuals
  4. Car Navigation system
  5. Comand MY11
  6. Operating instructions manual
Mercedes-Benz Comand MY11 Operating Instructions Manual

Mercedes-Benz Comand MY11 Operating Instructions Manual

2011 e-coupecab
Hide thumbs Also See for Comand MY11:
Table of Contents

Advertisement

Quick Links

Download this manual
É2125846681.ËÍ
2125846681
Order no. 6515 6910 13 Part no. 212 584 66 81 Edition B 2011
COMAND
Operating Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Comand MY11 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mercedes-Benz Comand MY11

Summary of Contents for Mercedes-Benz Comand MY11

  • Page 1 COMAND Operating Instructions É2125846681.ËÍ 2125846681 Order no. 6515 6910 13 Part no. 212 584 66 81 Edition B 2011...
  • Page 2 Symbols Publication details Warning Internet Environmental note Further information on Mercedes-Benz Possible damage to the vehicle vehicles and Daimler AG can be found on the Internet at the following websites: Instruction http://www.mercedes-benz.com Continuation symbol http://www.daimler.com (Y page) Page reference Display...
  • Page 3 Welcome to the world of Mercedes-Benz First of all, familiarize yourself with the COMAND control panel and read this manual thoroughly before driving off. This will help you to obtain the maximum pleasure from your COMAND control panel and to avoid endangering yourself and others.
  • Page 5 Contents Index ............4 At a glance ........... 13 Introduction ......... 10 System settings ........41 Navigation system ......49 Telephone .......... 101 Audio ..........123 Video ..........161 Rear Entertainment System ..... 171...

  • Page 6: Table Of Contents

    Index Settings ........... 46 1, 2, 3 ... Telephony ........103 911 emergency call ......103 ® Bluetooth audio device Connecting ........148 Reconnecting ......... 150 ® Bluetooth audio mode Active partition (USB devices only) Switching on ........151 Selecting ........157 Address book ®...
  • Page 7 Index Changing direction Destination memory ......83 Announcement phase ...... 70 Deleting an entry ......86 Change of direction phase ....71 My address ........83 Preparation phase ......70 Storing a destination ......84 Channel presets ........ 126 Destinations Character entry ........
  • Page 8 Index ® Google Maps ........68 Arrival time/distance to Gracenote Media Database ....141 destination ........91 Calling up ......... 61 City model ........92 Hands-free microphone Map display ........89 Switching on/off ......109 Moving ........61, 88 Harman/kardon ®...
  • Page 9 Index File systems ........143 Phone book entry Formats ......... 144 Searching ........110 Selecting a medium ....... 139 Playback options ....142, 148, 157 Multifunction display ......21 Point of interest Multifunction steering wheel ..... 20 Category .......... 64 Multisession CDs .......
  • Page 10 Index Continue .......... 73 Continuing ........73 Telephone Destination reached ......73 Ending an active call ...... 109 Lane recommendations ....72 Entering phone numbers ....108 Off-road ........... 76 Incoming call ......... 108 Traffic reports ........78 Outgoing call ......... 108 Route options redialing .........
  • Page 11 Index Selecting a scene/chapter .... 166 Stop function ......... 165 Video DVD mode Switching to ........163 Voice Control System Settings ........... 45 Volume Adjusting ......... 35 Navigation announcements ..... 35 Phone calls ........35 Waveband Switching (radio) ......125 ®...

  • Page 12: Introduction

    We recommend to have any service work on cause undesired operation of the device. electronic components carried out by an Any unauthorized modification to this authorized Mercedes-Benz Center. device could void the user's authority to operate the equipment. WARNING USA only: This device complies with Part In order to avoid distraction which could lead 15 of the FCC Rules.
  • Page 13 Contact an authorized Mercedes- Mercedes-Benz Center for this purpose. In Benz Center if you have any questions about particular, work relevant to safety or on equipment or operation.
  • Page 14 Introduction Function restrictions For safety reasons, some COMAND functions are restricted or unavailable while the vehicle is in motion. You will notice this, for example, because either you will not be able to select certain menu items or COMAND will display a message to this effect.
  • Page 15 COMAND operating system ....14 Multifunction steering wheel ..... 20 Remote control ........24 Operating COMAND ......27 Basic functions of COMAND ....34 Climate control status display ... 38 Rear view camera ....... 39...

  • Page 16: Components

    COMAND operating system COMAND operating system Components of COMAND COMAND consists of: Overview the COMAND display the COMAND control panel with DVD changer the COMAND controller with back and clear buttons You can use COMAND to operate the following main functions: the navigation system the audio function with radio and satellite radio modes, disk (audio CD/DVD and MP3...

  • Page 17: Comand Control Panel

    COMAND operating system COMAND control panel Example Function Page Function Page Switches to radio mode Selects a station using the station search function Switches wavebands Rewind Switches on satellite radio mode Selects the previous track Switches to audio CD/DVD Switches COMAND on/off or MP3 mode Adjusts the volume Switches to video DVD...

  • Page 18: Comand Controller

    COMAND operating system Function Page Function Page PCMCIA memory card eject Mute button Switches off navigation announcements Accepts a call Dials a number Calls up the telephone basic menu (telephony via Redials ® Bluetooth interface) Rejects a call Switches to navigation Ends an active call mode Calls up the system menu...

  • Page 19: Back Button

    COMAND operating system Back button Example Back button To exit the menu: press back button : briefly. COMAND changes to the next higher menu level in the current operating mode. You can also exit a menu by sliding the COMAND controller XVY or ZVÆ. To switch to the basic display: press and hold back button :.

  • Page 20: Comand Display

    COMAND operating system COMAND display Display overview The COMAND display shows the function currently selected and its associated menus. The COMAND display is divided into several areas. The radio display is shown in the example. Status bar To call up the audio menu Main function bar Display/selection window Radio menu bar...

  • Page 21: Comand Operating System

    COMAND operating system Navi Audio Telephone Video System Setting route FM/AM radio Telephone Video DVD Calls up the calculation mode system menu Map orientation SatRadio address book Point of interest Disc symbols on the map Traffic information on Memory card Text information on MUSIC REGISTER...

  • Page 22: Cleaning Instructions

    Multifunction steering wheel Settings Time Consumption Display off Activating/ deactivating Bluetooth ® Resetting COMAND Delete your personal data using this function, for example before selling your vehicle. If the function is activated and COMAND is switched on, the image of the rear view camera is automatically shown in the COMAND display when reverse gear is engaged.

  • Page 23: Multifunction Steering Wheel

    Multifunction steering wheel To select a menu: press the = Function Page or ; button. ? Activates voice To select a submenu or scroll through control (see the separate the list: press the 9 or : button. operating instructions) To select the next menu up: press the % button.
  • Page 24 Multifunction steering wheel Route guidance active Operating the DVD changer/memory card/MUSIC REGISTER/Media The display shows: Interface the distance to the destination Switch on COMAND ( page 34). the distance to the next change of direction Switch on Disc, Memory current street Card page 137), MUSIC...
  • Page 25 Multifunction steering wheel An exact phone number exists: press the Some jurisdictions prohibit the driver from 6 or a button to make the call. using a cellular mobile phone while driving a Connecting Call message and the vehicle. number dialed appear in the multifunction Bear in mind that at a speed of just 30 mph display.

  • Page 26: Remote Control

    Remote control In the multifunction display, select the phone menu using the = or ; button. Phone Ready message appears in the multifunction display. Press the 6 button to display the list with the last numbers or names dialed. Press the : or 9 button to select a phone number or name.
  • Page 27 Remote control Point the remote control at the screen COMAND: e.g. to select a station from the which has been selected for remote presets, select a track, direct entry, phone operation. number entry Rear Seat Entertainment System: to Press button : on the remote control. select a track, direct entry The respective screen (rear or COMAND) switches on or off.
  • Page 28 Remote control Selecting a menu/menu item and confirming your selection Select a menu/menu item using the =;9: buttons and press the 9 button to confirm.

  • Page 29: Operating Comand

    Operating COMAND Functions of the E and F button You can use the remote control to execute the same functions as the COMAND control panel. The functions for the Rear Seat Entertainment System are described later ( page 181). Mode Function Audio mode Selects a station using the station search function (...
  • Page 30 Operating COMAND To call up the audio menu Address entry menu Main function bar Main function bar Slide ZV the COMAND controller and Select Audio in the main function bar by switch to main function bar :. sliding ZV the COMAND controller and press W to confirm.

  • Page 31: Example Of Operation

    Operating COMAND Calling up the audio function Select Audio in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. The basic display of the current audio operating mode, e.g. audio CD, appears. Selection bar Select the station by turning cVd the COMAND controller and press W to...

  • Page 32: Character Entry

    Operating COMAND You can enter the characters using either the character bar or the number keypad. In the selection list, you select an entry to copy it to the address entry menu. Option 1: city list with character bar Call up the city list with character bar page 54).

  • Page 33: Characters

    Operating COMAND You see which characters you can enter with Currently selected character that key. Each time the key is pressed, the Character bar next character is selected. To cancel an entry Example: key p: List press once = M List G shows all available city names press twice = N beginning with N.

  • Page 34: Book

    Operating COMAND To accept the first list entry: press W and Confirm NEW YORK with COMAND controller W. hold the COMAND controller until the address entry menu appears. The address entry menu appears. You can The accepted list entry is shown there. now enter a street, for example.

  • Page 35: Entering

    Operating COMAND Creating a new entry in the address book Call up the input menu with data fields page 117). To switch the character bar to upper- case/lower-case letters To switch the character bar from upper/ lower-case letters to digits To change the language of the character Input menu with data fields Selected data field with cursor...

  • Page 36: Characters

    Basic functions of COMAND To reposition the cursor within the data field: select 2 or 3 and press W to confirm. Cursor in the next data field To store an entry 4 and 5 icons to select a data field Cursor (repositioned) Option 2 2 and 3 icon to reposition the cursor...

  • Page 37: Sound Settings

    Basic functions of COMAND You can also adjust the volume for the Mute following: Switching audio and video sources on/ navigation announcements phone calls Press the 8 button on COMAND or on Voice Control System voice output (see the the multifunction steering wheel. separate operating instructions) The sound from the respective audio or video source is switched on or muted.

  • Page 38: Surround Sound System

    Basic functions of COMAND The Fade function is used to control whether the sound is louder in the front or the rear of the vehicle. Select Bal./Fad. (balance/fader) in the sound menu by turning cVd the COMAND controller and press W to confirm. Select Sound by sliding VÆ...

  • Page 39: Basic Functions Of Comand

    Basic functions of COMAND video DVD (PCM, dts and Dolby Digital audio formats) Because some DVDs contain both stereo and multichannel audio formats, it may be necessary to set the audio format page 142). ® Logic7 function creates a Switching surround sound on/off surround sound experience for every passenger when playing, for example, Example: switching on surround sound for...

  • Page 40: Climate Control Status Display

    Climate control status display ® ® The climate status display appears when: Select Logic7 Logic7 turning cVd the COMAND controller and You turn one of the two temperature press W to confirm. controls and set the temperature to the left Depending on your selection, surround or right.

  • Page 41: Rear View Camera

    Rear view camera The illustration shows an example of the Select Activation by R gear and press current settings for: W to confirm. The function is switched on O or off ª, the defrost function (top) depending on the previous status. the climate control style in automatic mode (center) the maximum cooling (bottom)

  • Page 43: System Settings

    COMAND features ....... 42 Display settings ........42 Time settings ........43 Fuel consumption display ....44 Text reader settings ......44 Voice Control System settings ..45 Bluetooth ® settings ......46 System language settings ....47 Reset function ........47...

  • Page 44: Comand Features

    Display settings COMAND features These Operating Instructions describe all standard and optional equipment available for your COMAND system at the time of purchase. Country-specific deviations are possible. Please note that your COMAND system may not be equipped with all the features described.

  • Page 45: Time Settings

    Time settings Select Time by turning cVd the COMAND Design Explanation controller and press W to confirm. The display is set Day Mode Select Set Time and press W to confirm. permanently to day design. Night Mode The display is set permanently to night design.

  • Page 46: Fuel Consumption Display

    Text reader settings Setting the time zone and switching between summer and standard time Press the W button. Select Time by turning cVd the COMAND controller and press W to confirm. Select Time Zone and press W to confirm. You will see a list of time zones. The # dot indicates the current setting.

  • Page 47: Voice Control System Settings

    Voice Control System settings Starting new individualization Voice Control System settings It is only possible to start individualization Activating/deactivating the help when the vehicle is stationary. Before window starting, switch off all devices or functions In addition to the audible instructions, the which could interfere, such as the radio or the help window will show you other information navigation system.

  • Page 48: Bluetooth ® Settings

    ® Bluetooth settings At the end of the first part, you will see a Select Linguatronic and press W to prompt asking whether you wish to begin the confirm. second part. Select Delete Individualization Select and press W to confirm. press W to confirm.

  • Page 49: System Language Settings

    Reset function Select the language by turning cVd the COMAND controller and press W to confirm. COMAND loads the selected language and sets it. Reset function ® Activating/deactivating Bluetooth You can reset COMAND to the factory Press the W button. settings.
  • Page 51 COMAND features ....... 50 Introduction ......... 50 Basic settings ........52 Destination entry ........ 53 Entering a point of interest ....63 Search & Send ........68 Route guidance ........69 Traffic reports ........78 Destination memory ......83 Previous destinations ......86 Map operation and settings ....

  • Page 52: Comand Features

    Introduction COMAND features regulations during your journey. Road and traffic rules and regulations always have These Operating Instructions describe all priority over the navigation commands standard and optional equipment available generated by the system. for your COMAND system at the time of purchase.
  • Page 53 Introduction fact that certain menu items are grayed out and cannot be selected. The following entries are not possible, for example: entering the destination city and street entering a destination via the map entering in the vicinity of a city or via a name search editing entries direct entry using the number keypad...

  • Page 54: Basic Settings

    Basic settings Select Mode and press W to confirm. Basic settings Route mode Setting route type and route options You can select the following route types: Short Route: COMAND calculates a route with the shortest possible (minimized) distance without taking traffic reports into consideration.

  • Page 55: Address Entry Menu

    Destination entry Avoid Ferries route option is switched entering the state/province, city/zip code, street and house number In some cases, e.g. when calculating entering the state/province, city/zip code, particularly long routes, COMAND may not street and intersection be able to take all the selected route entering the state/province, street, city options into account.

  • Page 56: Address Entry Menu

    Destination entry Address entry menu Example: list of last states/provinces Depending on the sequence in which you To select a state/province: turn cVd the enter the address and on the data status of COMAND controller and press W to the digital map, some menu items may not be confirm.

  • Page 57: Destination Entry

    Destination entry City list Street list Select an entry by turning cVd the Select a street by turning cVd the COMAND controller. COMAND controller and press W to confirm. Irrespective of the option, press W to If an entry features the G icon, it cannot confirm your selection.
  • Page 58 Destination entry Starting route calculation COMAND controller and press W to confirm. You can now have COMAND calculate the You will see the house number list either route to the address entered or save the with the character bar (option 1) or as a address first, e.g.

  • Page 59: Saving

    Destination entry Entering a ZIP code Select and press W to confirm. If you select Yes, COMAND will stop route Entering a ZIP code will delete a previously guidance and start route calculation for the entered city. new destination. Select in the address entry menu by If you select No, COMAND will continue turning cVd and sliding ZVÆ...
  • Page 60 Destination entry navigation mode (entering a city)" section page 30). ZIP code list Select the desired zip code by turning cVd the COMAND controller. Option 2: center list as selection list Irrespective of the option, press W to confirm your selection. If COMAND is able to assign the ZIP code unambiguously to a specific address, the address entry menu appears again.

  • Page 61: Destination Memory

    Destination entry Option 1: intersection list with character Selecting a destination from the destination memory (e.g. My address) Enter an intersection. Instructions for Introduction entering characters using city input as an The destination memory always contains an example can be found in the "Entering characters in navigation mode (entering a entry named "My address".

  • Page 62: Last Destination

    Destination entry Irrespective of the option, press W to confirm your selection. The address entry menu appears again. "My address" has been entered. To start route calculation: select Start and press W to confirm. Entering a destination from the list of last destinations Character entered by the user To switch on navigation mode: press the...

  • Page 63: Calling Up

    Destination entry Moving the map and selecting the Further information on the "Last destination destinations" memory can be found on page 86). To scroll the map: slide XVY, ZVÆ or aVb the COMAND controller. Entering a destination using the map To set the map scale: as soon as you turn cVd the COMAND controller, the scale bar Calling up the map...

  • Page 64: Intermediate Stop

    Destination entry To select a category: select a category by Entering an intermediate stop turning cVd the COMAND controller and Introduction pressing W to confirm. COMAND first searches in the selected When route guidance is active, you can enter category for destinations along the route. an intermediate stop.

  • Page 65: Entering A Point Of Interest

    Entering a point of interest Select Other and press W to confirm. Select Delete Stopover and press W to confirm. Select Address Entry, From Memory, COMAND deletes the intermediate stop From Last Destinations From POIs. and recalculates the route to the main destination.

  • Page 66: Point Of Interest Category

    Entering a point of interest Select Search By Phone Number Entering a point of interest in the press W to confirm. vicinity of a specific city You will see a list of phone numbers. Option 1 Proceed as described in the "Point of Select Other City in the menu and press...
  • Page 67 Entering a point of interest Selecting a category Irrespective of the option, press W to confirm your selection. Depending on the number of categories If the selected main category does not available, you will see the main category list contain any sub-categories, the point of either with the character bar (option 1) or as interest list appears.

  • Page 68: Point Of Interest List

    Entering a point of interest search range to approximately 200 km. If Depending on the point of interest COMAND finds one point of interest within selected, COMAND uses different this radius, it finishes the search. reference points in determining the linear distance to the destination: If you select the list item, the point of...

  • Page 69: With Character Bar

    Entering a point of interest To show the detailed view: select Details and press W to confirm. To connect a call: select Call and press W to confirm (available if the point of interest entry contains a phone number). COMAND switches to telephone mode page 109).

  • Page 70: Search & Send

    Search & Send To show details for the selection: select Selecting a point of interest using the Details and press W to confirm. To start route calculation: select Start You can select points of interest that are and press W to confirm. available in the selected (visible) section of the map.

  • Page 71: Route Guidance

    The destination addresses are downloaded in the same order as they are sent. If you own several Mercedes-Benz vehicles equipped with an mbrace subscriber account, each destination address can be downloaded by each...

  • Page 72: Announcement Phase

    Route guidance For this reason, you must always observe applicable road and traffic rules and regulations during your journey. Road and traffic rules and regulations always have priority over the navigation commands generated by the system. Route guidance begins once a route has been calculated ( page 56).

  • Page 73: Change Of Direction Phase

    Route guidance Example display: announcement phase Example display: change-of-direction phase Next road Current vehicle position: the tip of the triangle indicates the vehicle’s direction Point at which the change of direction of travel takes place (light blue dot, shown in both Graphic representation of the distance to the left and right displays) the next change of direction...

  • Page 74: Lane Recommendations

    Route guidance Lane recommendations Overview On multilane roads, COMAND can display lane recommendations for the next change of direction. The corresponding data must be available in the digital map. COMAND displays lane recommendations B, based on the next two changes of direction.

  • Page 75: Cancel

    Route guidance Display and description of lane recommendations The colors used in the lane recommendation display vary depending on whether day or night design is switched on. Lane Day design Night design Recommended lane C Dark blue Light blue In this lane, you will be able to complete the next two changes of direction without changing lanes.
  • Page 76 Route guidance Select Navi in the main function bar by Please always use this feature instead of sliding ZV and turning cVd the COMAND consulting the map display for directions. controller and press W to confirm. Consulting the symbols or map display for directions may cause you to divert your Select Audio Fadeout...

  • Page 77: Route Guidance

    Route guidance To delete the blocked section: select Selected route type ( page 52) Delete while the message is shown and Route option settings ( page 52) press W to confirm. To select the next or previous COMAND calculates the route without the alternative route: select Next block.

  • Page 78: Off-Map

    Route guidance section, for example the distance to be driven on the road and road designation. The highlighted route section is marked in white with a red border on the map. To view the next or previous route section: select Next Previous press W to confirm.
  • Page 79 Route guidance navigation announcements and displays on The route is highlighted blue, starting from roads known to the system. the last recognized street the vehicle was on before it left the map. As soon as the vehicle is back on a road known to the system, route guidance continues in the usual way.

  • Page 80: Real-Time Traffic Reports

    Traffic reports Traffic reports Destination Map scale Conditions To receive real-time traffic reports via satellite radio, you require: optionally available satellite radio equipment a subscription to SIRIUS XM Satellite Radio Traffic Message Service Further information on satellite radio is available in the "Satellite radio" section page 128).

  • Page 81: Traffic Reports

    Traffic reports Icon for real-time traffic reports Icon Description Traffic reports in the map display List of Traffic traffic reports reports Warning This appears at the beginning of the Entry type: Entry (red) affected route section if route warning type: guidance is active and the route leads warning through an affected area.
  • Page 82 Traffic reports Icon Description Traffic reports in the map display List of Traffic traffic reports reports Green Unimpeded No delays (Not (Not line with traffic flow available) available) Only appears on the side of the road arrows (direction of travel) on which traffic flow is unimpeded Red line Warning...
  • Page 83 Traffic reports Example: traffic report To show all reports: select Display All Messages by turning cVd the COMAND Depending on your selection: Read out controller and press W to confirm. all messages on route You see a list of all roads, areas and regions Messages for which traffic reports are available, even Report 8 of 16 for the road affected...

  • Page 84: Traffic Reports

    Traffic reports Having traffic reports on the route read out Introduction The read-aloud function is only available while route guidance is active. It reads out traffic reports affecting the current route. You can set the language ( page 47) and the read- aloud speed ( page 44).

  • Page 85: Destination Memory

    Destination memory To show the menu: press W the COMAND page 53). Then, save the home address without starting route guidance controller. page 57). Select Navi by sliding ZV and turning cVd the COMAND controller and press Adopting an address book entry as a W to confirm.

  • Page 86: Storing A Destination

    Destination memory then save the home address without starting route guidance. Select Home Work and press W to confirm. In both cases, you will see the address book either with the character bar or as a selection list. To select an address book entry: proceed as described in the "Searching for an address book entry"...

  • Page 87: Destination Memory

    Destination memory Selecting storing options When the address book is full, no destinations can be saved in the destination memory. You To save the destination without a must first delete address book entries name: select Save Without Name page 117). press W to confirm.

  • Page 88: Previous Destinations

    Previous destinations "Entering characters in navigation mode Select Dest. in the navigation system (entering a city)" section ( page 30). menu bar by turning cVd the COMAND controller and pressing W to confirm. Then, select ¬ and press W to confirm. COMAND stores the destination under the Select From Memory...

  • Page 89: Previous Destinations

    Previous destinations Route guidance is active destinations in the destination memory. It will be stored there permanently. To show the menu: press W the COMAND controller. Storing a destination permanently in Select Position in the navigation system the destination memory menu bar by turning cVd the COMAND controller and press W to confirm.

  • Page 90: Map Operation And Settings

    Map operation and settings Select and press W to confirm. Moving the map If you select Yes, the entry is deleted. Showing the crosshair If you select No, the process will be aborted. To hide the menu: slide ZV the COMAND controller and, when the Full Screen Map operation and settings...

  • Page 91: Bird's-Eye View

    Map operation and settings Select Center Map On Stopover Setting the map to the vehicle press W to confirm. position, destination or intermediate The crosshair is centered on the stop intermediate stop position. Centering the map on the vehicle position Map display To show the menu: press W the COMAND controller.
  • Page 92 Map operation and settings of interest are, for example, gas stations, hotels, cinemas and restaurants. The following settings are possible: Standard Symbols Symbol display determined by the factory settings. Personal Symbols You can determine the symbols yourself. No Symbols The map does not show any symbols. Example display: Bird's-eye view To show the menu: press W the COMAND Current crosshair position...

  • Page 93: Map Information

    Map operation and settings Map information in the display Icon for estimated time of arrival Estimated time of arrival Showing text information You can only see this display during route During route guidance, you can have map guidance. While scrolling the map information displayed at the bottom edge of page 61), you will see additional data, e.g.

  • Page 94: City Model

    Map operation and settings display : may vary from the actual value, Select Topographic Map and press W to because the navigation system uses the GPS confirm. signals for the calculation. Depending on the previous state, switch the option on O or off ª. While scrolling the map ( page 61), you will see the geo-coordinates of the crosshair...

  • Page 95: Additional Settings

    Information about new versions of the Speed & Flow digital map can be obtained from an Road sections are illustrated with yellow or authorized Mercedes-Benz Center. red car icons :. Yellow car icons: traffic jam, average speed 25 – 45 mph Red car icons: traffic jam, average speed 5 –...
  • Page 96 Additional settings To switch on navigation mode: press the To confirm the settings: press W. Ø function button. The list appears. The previously selected area to be avoided has been added and To show the menu: press W the COMAND activated.
  • Page 97 Additional settings Select Display / Change and press W to Select Navi in the main function bar by sliding ZV and turning cVd the COMAND confirm. The area to be avoided is indicated in the controller and press W to confirm. map.
  • Page 98 Additional settings To show the menu: press W the COMAND controller. Select Navi in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. Select Save Off-road Route and press W to confirm. Select Delete Off-road Route Memory and press W to confirm.
  • Page 99 Information about new versions of the digital map can be obtained from an authorized Mercedes-Benz Center. You can have the digital map updated at the center with a DVD, or you can update the map yourself.
  • Page 100 Additional settings then continues from where it was The update process can take a long time interrupted when the system is restarted. (over an hour), depending on the size of the digital map. During this time, you will only COMAND may prompt you to change the DVD be able to switch on radio mode and to during the update.

  • Page 101: Problems With The Navigation System

    Problems with the navigation system Problems with the navigation system Problem Possible causes/consequences and M Solutions COMAND is unable to Route guidance is canceled if you interrupt the journey for more continue route than two hours. guidance after the "Interrupting the journey" refers to stopping the vehicle and journey has been switching off COMAND.
  • Page 102 The navigation system will be operational again until it has to access the faulty area of the hard drive once more. The message will then reappear. Consult an authorized Mercedes-Benz Center. Problem Possible causes/consequences and M Solutions You see a message The DVD containing the digital map cannot be used for the update.

  • Page 103: Telephone

    COMAND features ......102 General information ......102 Telephony via the Bluetooth ® inter- face ............ 103 Reception and transmission volume 107 Telephone operation ......108 Using the phone book ...... 110 Using call lists ........113 Using the address book ....116...

  • Page 104: Comand Features

    -capable mobile A call may be disconnected if: phones to COMAND on the Internet http://www.mbusa-mobile.com. Or call there is insufficient network coverage in the Mercedes-Benz Customer Assistance certain areas. Center on you move from one transmitter/receiver 1-800-FOR-MERCedes(1-800-367-6372) for area (cell) into another and no channels are the USA or on 1-800-387-0100 for Canada.

  • Page 105: Emergency Call

    No Service message will appear phones with COMAND can be found on the for a short while. Internet at http://www.mbusa-mobile.com. Or call the Mercedes-Benz Customer Assistance 911 emergency call Center at 1-800-FOR-MERCedes(1-800-367-6372) WARNING (for the USA) or Customer Relations at The 911 emergency call system is a public 1-800-387-0100 (for Canada).

  • Page 106: Interface

    ® Telephony via the Bluetooth interface function (see the mobile phone operating COMAND controller and press W to instructions). confirm. ® Bluetooth device name Select Bluetooth Phones and press W to ® Every Bluetooth device has its own confirm. ® Bluetooth device name.

  • Page 107: External Authorization

    ® Telephony via the Bluetooth interface meantime. In this case, start a new search To confirm an entry in COMAND: press ® W the COMAND controller. to update the Bluetooth telephone list. Now enter the same passcode in the mobile Authorizing (registering) a mobile phone.

  • Page 108: De-Authorizing

    De-registering (de-authorizing) a phones. mobile phone You can only switch to another authorized Mercedes-Benz USA, LLC recommends de- phone if you are not currently making a call. authorization on both COMAND and on the ® mobile phone. Subsequent authorization may Select the mobile phone in the Bluetooth otherwise fail.

  • Page 109: Reception And Transmission Volume

    Internet at Select or No. http://www.mbusa-mobile.com. Or call If you select Yes, the device will be deleted the Mercedes-Benz Customer Assistance ® from the Bluetooth telephones list. Center at If you select No, the process will be aborted.

  • Page 110: Telephone Operation

    Telephone operation Telephone operation Making a call Incoming call Entering a telephone number using the number keypad Rejecting or accepting a call Call up the telephone basic menu When there is an incoming call, you see a page 107). corresponding window in the display. Enter the digits using the number keypad.

  • Page 111: Connecting

    Telephone operation Connecting a call to an entry in a call list To switch off: select Mic Off and press or in the COMAND phone book W to confirm. If the microphone is switched off, the Open a call list and select an entry display shows the Q icon and the page 114).

  • Page 112: Calling Up

    Using the phone book characters in the character bar and press W to confirm. Press the corresponding key on the COMAND number keypad. Every character selected will be transmitted immediately. To send a phone book entry as a DTMF sequence: select Name by turning cVd the COMAND controller and press W to...

  • Page 113: Selecting

    Using the phone book Changing the character set of the Select the characters of the entry you are character bar searching for one by one and press W to confirm. Select p and press W to confirm. When the selection is clear, COMAND The character set changes each time you switches automatically to the selection list.

  • Page 114: Using The Phone Book

    Using the phone book To return to the phone book with Creating a new entry in the phone character bar: select Back in the list and book press W to confirm. Slide ZV the COMAND controller repeatedly in the phone book until the Press the k back button.

  • Page 115: Using Call Lists

    Using call lists Select and press W to confirm. If you select Yes, a selection list will appear containing the five existing numbers. If you select No, the process will be aborted. Select the number to be overwritten by turning cVd the COMAND controller and press W to confirm.

  • Page 116: Displaying Details

    Using call lists To close the list: select Back and press The respective menu item can only be W to confirm or press the k button. selected if calls have already been made or received in COMAND. Displaying missed calls in the COMAND display is not supported by all mobile Displaying details about a list entry phones.
  • Page 117 Using call lists the address and phone books" section Number category Display (phone page 32). book and address book) Adding a phone number to an address Not Classified book entry ¸ Home Open a call list and select an entry page 114).

  • Page 118: Calling Up

    Using the address book If you select No, the process will be aborted. You can use these entries to make telephone calls and for navigation. Select the number to be overwritten in the list by turning cVd the COMAND controller Address book entries remain stored when and press W to confirm.
  • Page 119 Using the address book Select in the address book by sliding Searching for an address book entry VÆ and turning cVd the COMAND Call up the address book ( page 116). controller and press W to confirm. Select Search in the address book by An input menu with data fields appears.

  • Page 120: Changing An Entry

    Using the address book Displaying the detailed view for an Changing an address book entry address book entry Changing an entry Selecting an entry Option 1: search for an address book entry Search for an address book entry and turn and turn cVd the COMAND controller to cVd the COMAND controller to select it in select it in the selection list (...

  • Page 121: Starting Route Guidance

    Using the address book Select Change Category and press W to Starting route guidance to an entry confirm. Note Select a number category, e.g. Home. This function is available as soon as you have Select a telephone category, e.g. Mobile stored a destination in the destination Phone.

  • Page 122: Importing Contacts

    Using the address book Listening to a voice tag Voice tags Search for an address book entry with a Adding or changing a voice tag voice tag ( page 117). You can enter voice tags via the Voice Control Select Options by sliding VY the System (see the separate operating...

  • Page 123: Using The Address Book

    Using the address book Please bear the following in mind: Select From Mobile Phone in the menu by turning cVd the COMAND controller and ® Bluetooth must be activated in COMAND press W to confirm. ® and on the Bluetooth device (see operating instructions for the device).
  • Page 124 Using the address book Deleting contacts Select Overwrite and press W to confirm. Select Address Book in the address book imports the entries from the memory or, if the telephone basic menu is shown, card into the address book. select Phone by sliding VÆ...

  • Page 125: Audio

    COMAND features ......124 Radio mode ........124 Satellite radio ........128 Audio CD/DVD and MP3 mode ..133 MUSIC REGISTER ......144 ® Bluetooth audio mode ....148 Media Interface mode ...... 152 Audio AUX mode ....... 158...

  • Page 126: Comand Features

    Radio mode COMAND features These Operating Instructions describe all standard and optional equipment available for your COMAND system at the time of purchase. Country-specific deviations are possible. Please note that your COMAND system may not be equipped with all the features described.

  • Page 127: Radio Mode

    Radio mode Notes on HD Radio™ Switching wavebands The functions of HD Radio include: Option 1 digital transmission in the same You can switch the radio between the FM, AM wavebands as analog AM/FM. The and WB waveband. analog AM/FM stations remain in the Press the $ function button repeatedly same position when selecting a station until the desired waveband is selected.

  • Page 128: Selecting

    Radio mode Enter a frequency using the number keys. Selecting a station COMAND tunes in to the frequency Selecting stations using the station entered. search function Waveband Frequency Press the E or F button. AM (MF) 530 – 1700 kHz Turn cVd or slide XVY the COMAND FM (VHF) 87.7 –...

  • Page 129: Autostore

    Radio mode Weather Band Switching to Press the $ function button repeatedly until the Weather Band is switched on. Select the currently selected waveband by sliding VÆ and turning cVd the COMAND controller and press W to confirm. Example display: station presets Select from the menu and press W to Select a preset by turning cVd the...

  • Page 130: Satellite Radio

    Satellite radio Select a channel by turning cVd the Select Info in the radio display by sliding VÆ and turning cVd the COMAND COMAND controller and press W to controller and press W to confirm. confirm. Information on the currently selected station is displayed.

  • Page 131: Registering

    Satellite radio of Mercedes-Benz USA, LLC. Operation Call the phone number of your satellite may also be impaired in certain locations radio provider shown on the screen. (e.g. tunnels, parking garages as well as You can also have the satellite service inside or next to buildings).

  • Page 132: Category Satellite Radio

    Satellite radio to satellite radio mode. Pressing the button again takes you back to FM radio mode. Option 2 Select Audio in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. If satellite radio mode was the last mode selected, it will now be active.
  • Page 133 Satellite radio by channel number and allows you to To enter a channel: irrespective of the browse all available channels. option, press the corresponding number keys on the control panel one after the other. Selecting a channel COMAND sets the selected channel. Channel search You can only select currently permitted Turn cVd or slide XVY the COMAND...

  • Page 134: Displaying Information

    Satellite radio Selecting a channel from the preset list To call up the preset list: select Presets by turning cVd the COMAND controller and press W to confirm. The channel preset list appears. To set a channel: select a preset by turning cVd the COMAND controller and press W to confirm.

  • Page 135: At A Glance"

    Audio CD/DVD and MP3 mode Displaying service information Audio CD/DVD and MP3 mode The provider's customer service center is Important safety notes available by phone at any time to answer any WARNING general questions or questions on the versions available. COMAND is classified as a Class 1 laser product.

  • Page 136: Load/Eject Button

    Audio CD/DVD and MP3 mode Inserting discs into the DVD changer Never insert a data medium before COMAND prompts you to do so. Never insert more than one disc into a magazine tray at a time. Load/eject button V Disc slot The DVD changer has a fixed magazine with Insert a disc into the disc slot with the six trays.
  • Page 137 Audio CD/DVD and MP3 mode To exit the menu: press the V eject/ To eject a CD/DVD: press the V load/ load button again or press the k button. eject button. Select Back by sliding VÆ and turning Select Back by sliding VÆ...

  • Page 138: Inserting

    Audio CD/DVD and MP3 mode Take the disc out of the slot. Not all commercially available PCMCIA If you do not take the disc out of the slot, memory cards and storage media are COMAND will draw it in again automatically designed for the temperatures which may after a short while and load it again.

  • Page 139: Audio Cd Mode

    Audio CD/DVD and MP3 mode Press eject button : twice. Select Audio by sliding ZV and turning The memory card is ejected. cVd the COMAND controller and press W to confirm. Remove the memory card from slot ;. The audio menu appears. Select Disc Memory Card...

  • Page 140: Pause Function

    Audio CD/DVD and MP3 mode Example display: audio DVD mode Track time Graphic time and track display Current playback settings (no symbol for "Normal track sequence") Sound settings Media selection (display shows either Media or Changer) Current folder To call up the folder list Data carrier position in the media list Playback options Disc type...

  • Page 141: Stop Function

    Audio CD/DVD and MP3 mode Stop function This function is only available in audio DVD mode. Switch on audio DVD mode ( page 137). To interrupt playback: select É by sliding VÆ and turning cVd the COMAND controller and press W to confirm. The Ë...

  • Page 142: Selecting A Track

    Audio CD/DVD and MP3 mode controller until the desired position has Selecting a track been reached. Selecting by skipping to a track To skip forwards or back to a track: turn Press and hold the E or F button cVd the COMAND controller when the until the desired position is reached.

  • Page 143: Audio Cd/Dvd And Mp3 Mode

    Audio CD/DVD and MP3 mode Media Database to identify unknown audio tracks when running in audio CD mode. This is only possible if the relevant information is saved in the Gracenote Media Database and if the "Gracenote Media Database" function is activated.

  • Page 144: Playback Options

    Information about new versions can be to the MP3 data carrier when it is created. obtained from an authorized Mercedes-Benz Alphabetical order is the most common. Center. Once all the tracks in a folder have been...

  • Page 145: Multisession

    Audio CD/DVD and MP3 mode The tracks in the currently active folder are If possible, use COMAND to play only CDs played in random order. which have been written in one session. To select options: switch on audio CD/ File structure of a data carrier DVD or MP3 mode ( page 137).

  • Page 146: Copy Protection

    MUSIC REGISTER Permissible formats Notes on CDs/DVDs COMAND supports the following formats: Discs with copy protection are not compatible with the audio CD standard and MPEG1 Audio Layer 3 (MP3) therefore may not be able to be played by Microsoft Windows Media Audio V2, V7, V8 COMAND.

  • Page 147: Switching To

    W to location. An error in COMAND might result confirm. in the loss of the music files stored in the MUSIC REGISTER. Mercedes-Benz is not liable for any loss of data. Switching to MUSIC REGISTER Option 1 Press the h function button repeatedly until the MUSIC REGISTER is switched on.
  • Page 148 MUSIC REGISTER Step 1: Selecting tracks to import If you do not select a target folder, a new one will be created. Select Tracks by turning cVd the COMAND controller and press W to Step 3: Beginning the import confirm. Select Start by turning cVd the COMAND...

  • Page 149: Music Register

    MUSIC REGISTER If you select No, the process will be aborted. Calling up memory space info Select Music Register by sliding VÆ and turning cVd the COMAND controller and press W to confirm. Select Memory Info and press W to confirm.

  • Page 150: Connecting

    COMAND, visit Random Folder (only in MP3 mode) http://www.mbusa-mobile.com (for The tracks in the currently active folder are USA). Or call the Mercedes-Benz Customer played in random order. Assistance Center at To select options: switch on the MUSIC 1-800-FOR-MERCedes(1-800-367-6372) REGISTER ( page 145).
  • Page 151 ( page 104) ® and in the Bluetooth device list. ® Bluetooth device list (example) Mercedes-Benz recommends authorizing a Newly detected mobile phone with ® mobile phone in Bluetooth telephony ® Bluetooth audio function in range page 104).

  • Page 152: Reconnecting

    ® Bluetooth audio mode To authorize: select an unauthorized ® With some Bluetooth audio devices, ® playback must be initially started on the Bluetooth audio device from the list (example: :) by turning cVd the device itself, so that COMAND can play the audio data.

  • Page 153: Bluetooth ® Audio Mode

    ® Bluetooth audio mode Option 4 Select De-Authorize and press W to confirm. In the media list ( page 139), select the A prompt appears asking whether you entry at position 9 by turning cVd the really wish to de-authorize this device. COMAND controller and press W to Select or No.

  • Page 154: Connection Options

    Media Interface. Store individual parts in a safe place. Adjusting the sound settings Only use genuine Mercedes-Benz connection cables. The sound settings are described using radio mode as an example in the "Basic functions You can connect the following data carriers of COMAND"...

  • Page 155: Mp3 Player

    For details and a list of supported devices, Media Interface and the remote control visit http://www.mbusa-mobile.com. Or ® (e.g. Bluetooth remote control), as this call the Mercedes-Benz Customer Assistance may produce unpredictable results. Center at ® Connecting a fully discharged iPod 1-800-FOR-MERCedes(1-800-367-6372) (for...

  • Page 156: Selecting Music Files

    Media Interface mode Option 3 Switching to Media Interface mode Press the i number button. General notes This selects the connected external audio In extreme cases, starting up individual device directly. functions can take up to several minutes – this depends on the external device and its content (e.g.

  • Page 157: Selecting A Category/Playlist

    Media Interface mode Selecting by skipping to a track controller until the desired position has been reached. To skip forwards or back to a track: turn cVd the COMAND controller when the Press and hold the F or E button display/selection window is active.

  • Page 158: Metadata

    Media Interface mode Categories instead of Random Folder as a Select the category/folder by turning playback option. cVd the COMAND controller and press W to confirm. For USB mass storage devices, you can You will see the content of the selected choose to display the metadata contained in category or selected folder.

  • Page 159: Media Interface Mode

    Media Interface mode USB mass storage device Playing back the contents of a category or folder This function is available for alphabetically sorted directories. This function is not Select the category or folder by turning available for albums or playlists, for example. cVd the COMAND controller.

  • Page 160: Audio Aux Mode

    Audio AUX mode All the tracks on the medium are played in DRM (Digital Rights Management) random order. protected files are not supported by the Media Interface. Random Categories Random Folder (for USB devices if Folder has been selected) Audio AUX mode The tracks in the currently active category or folder, including any subfolders, are Notes on audio AUX mode...
  • Page 161 Audio AUX mode If another audio source is switched on, you Select Standard Boost and press W to can now switch to audio AUX mode in the confirm. audio menu. Standard: the volume of the external audio source is adjusted to a standard value. Select Audio using ZV and press W to...

  • Page 163: Video

    COMAND features ......162 General information ......162 Basic settings ........162 Video DVD mode ....... 162 Video AUX mode ....... 168...

  • Page 164: Video Dvd Mode

    Video DVD mode Changing the picture format COMAND features Press W the COMAND controller to show These Operating Instructions describe all the menu. standard and optional equipment available Select DVD-Video by sliding VÆ and for your COMAND system at the time of turning cVd the COMAND controller and purchase.

  • Page 165: Dvd Playback Conditions

    Notes about discs factory. This setting can be changed at an Playback problems may occur when playing authorized Mercedes-Benz Center. This will copied discs. There are a large variety of allow you to play video DVDs with a discs, DVD authoring software, writing different region code, provided that they software and writers available.
  • Page 166 Video DVD mode Option 2 Press the h function button one or more times. COMAND switches to the previous disc operating mode. By pressing this function button repeatedly, you can change the operating mode in the following order: audio CD/DVD / video DVD/MP3 in the DVD changer or DVD single drive (disc Navigation menu displayed mode)

  • Page 167: Pause Function

    Video DVD mode audio mode. You can find further Media selection information about the media list on Sound settings page 139). Fast forward/rewind Stop function Slide XVY and hold the COMAND Press W the COMAND controller to show controller until the desired position has the menu.

  • Page 168: Selecting A Film/Title

    Video DVD mode Selecting a scene/chapter If the film is divided into scenes or chapters, you can select them directly while the film is running, or skip forwards step-by-step. Some DVDs do not permit this at certain points (e.g. during the opening credits). It may also be possible to select the scene/ chapter from within the menu stored on the DVD.
  • Page 169 Video DVD mode Select any menu item in the DVD menu and press W the COMAND controller to confirm. Select Go Up and press W to confirm. Back to the film Press the k back button repeatedly until you see the movie. To reconfirm your selection: confirm Select the corresponding menu item from Select...
  • Page 170 Video AUX mode Subtitles and camera angle Video AUX mode These functions are not available on all DVDs. AUX jacks The number of subtitle languages and camera An external video source (video AUX) can be angles available depends on the content of connected with COMAND via Media Interface the DVD.
  • Page 171 Video AUX mode Showing/hiding the menu To show: press W the COMAND controller. To hide: slide ZV the COMAND controller and confirm Full Screen by pressing W. Volume and sound settings You will find details on volume ( page 35) and sound ( page 35) settings in the "At a glance"...
  • Page 173 COMAND features ......172 General information ......172 Basic functions ......... 176 System settings ........ 178 Audio CD/DVD and MP3 mode ..179 Video DVD mode ....... 184 AUX mode .......... 188...

  • Page 174: Comand Features

    General information COMAND features WARNING Due to a potential choking hazard, wired These Operating Instructions describe all headset usage by children should only occur standard and optional equipment available with adult supervision. for your COMAND system at the time of purchase.

  • Page 175: Rear-Compartment Screens

    General information Rear-compartment screens Socket for corded headphones AUX jacks Display Infrared receiver diodes CD/DVD drive and AUX jacks CD/DVD slot AUX, right-hand (R) jack for audio signal (red) AUX, left-hand (L) jack for audio signal (white) AUX, video (V) jack (yellow) CD/DVD eject button The AUX jacks shown are for the AUX drive.
  • Page 176 General information Cordless headphones Overview Volume control To select a screen for the headphones Battery compartment cover To switch the cordless headphones on/off Indicator lamp with various displays ( page 174) Open both sides of the headphones and adjust the fit of the headphones by pulling the headphone band in the direction of the arrow.

  • Page 177: General Information

    General information Environmental note Status display Dispose of discharged batteries in an environmentally responsible manner. Green The headphones are switched on and connected to a screen. On the remote control Flashes The headphones are green establishing the connection to a screen. The headphones are switched on and the batteries are almost discharged.

  • Page 178: Basic Functions

    Basic functions Remove discharged batteries A from the Right-hand battery: the positive pole (+) must face downwards. tray. To close the battery compartment: Insert the new batteries. Observe the press battery compartment cover polarity markings on the batteries and downwards until it engages into place. battery compartment when doing so.

  • Page 179: Multiple Users

    Basic functions Setting using COMAND: press, for calling up the DVD menu and navigating example, the $ function button to within it switch on an audio mode. setting the language, subtitles and camera angle Select Audio by sliding ZV the COMAND controller and press W to confirm.

  • Page 180: System Settings

    System settings In both cases, select DVD-Video using the :=; buttons and press the 9 button to confirm. Select Brightness, Contrast Color using the 9: buttons and press the 9 button to confirm. An adjustment scale appears. Select a setting using the 9: buttons and press the 9 button to confirm.

  • Page 181: Audio Cd/Dvd And Mp3 Mode

    Audio CD/DVD and MP3 mode Setting the brightness General notes You will find information on the following Select Settings with the : button and topics in the Audio section: confirm with the 9 button. Select Brightness using the 9: notes on CDs/DVDs ( page 144) buttons and press the 9 button to confirm.
  • Page 182 Audio CD/DVD and MP3 mode Example display: audio CD mode The CD/DVD drive plays the disc: Type of data medium _ if it has been inserted correctly and is a Track number permissible disc, and Track name (only if stored on the disc as after you have switched on disc mode CD text) (audio CD/DVD/MP3 mode)

  • Page 183: Track Selecting

    Audio CD/DVD and MP3 mode To set the bass Selecting a track To set the treble Selecting by skipping to a track Disc name (if available) To skip forwards or backwards to a To call up the track list track: press the = or ; button on Stop function the remote control.
  • Page 184 Audio CD/DVD and MP3 mode Making a selection by entering the track number directly Press the h button on the remote control. The track entry display appears. Example: track 2 Press the · number button. Example: track 12 Press the corresponding number keys in Folder selection symbol rapid succession.

  • Page 185: Track Information

    Audio CD/DVD and MP3 mode To pause playback: select Ë using Select an audio format using the 9: buttons and press the 9 button the :=; buttons on the remote to confirm. control and press the 9 button to confirm. The Ë...

  • Page 186: Video Dvd Mode

    Video DVD mode Select Display Track Information Activating video DVD mode using the 9: buttons and press the Insert a video DVD. 9 button to confirm. The Rear Seat Entertainment System loads The function is switched on O or off ª, the disc.
  • Page 187 Video DVD mode To pause playback: select Ë and press Showing/hiding the menu the 9 button to confirm. To show: press the 9 button on the The Ë display changes to Ì. remote control. To continue playback: select Ì and press the 9 button to confirm.

  • Page 188: Video Dvd Mode

    Video DVD mode Skipping forwards/backwards Press the = or ; button on the remote control. Press the E or F button. The navigation menu ( page 164) appears for approximately eight seconds. Selecting a scene/chapter directly The examples illustrate how to select scene/ Select DVD Functions and press the 9...
  • Page 189 Video DVD mode Selecting menu items in the DVD menu To skip to the end of a scene: select the / menu item and press the 9 Select a menu item using the button to confirm. 9:=; buttons on the To skip to the beginning of a scene: remote control and press the 9 button to select the .

  • Page 190: Aux Mode

    AUX mode Select Audio Language and press the 9 remote control and press the 9 button to execute it. button to confirm. A menu appears and the first entry, A menu appears after a short while. The # dot in front of an entry indicates the Select, is highlighted.
  • Page 191 AUX mode source connected, you will see an audio Activating AUX mode menu. AUX drive Selecting the active COMAND source Select in the menu using the 9=; buttons on the remote Select in the menu using the control and press the 9 button to confirm. 9=;...
  • Page 192 AUX mode Select Brightness, Contrast Color and press the 9 button to confirm. An adjustment scale appears. Select a setting using the 9 or : button and press the 9 button to confirm. Changing the picture format Select Source in the AUX menu and press the 9 button on the remote control to In the status bar at the top, you will see the confirm.

Table of Contents