Mercedes-Benz COMAND MY11 Operating Instructions Manual page 123

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Switching wavebands
Option 1
You can switch the radio between the FM, AM
and WB waveband.
Press the ó function button repeatedly
X
until the desired waveband is selected.
i
Repeatedly pressing this function button
switches between the FM, AM and WB
wavebands in that order and then calls up
SatRadio mode. Pressing the button again
takes you back to FM radio mode.
Option 2
Select FM, AM or WB in the radio display by
X
sliding VÆ and turning cVd the COMAND
controller and press W to confirm.
You will hear the last station on the
selected waveband.
Selecting a station
Selecting stations using the station
search function
Press the E or F button.
X
or
Turn cVd or slide XVY the COMAND
X
controller while the display/selection
window in the radio display is active.
Station search scans up or down and stops
at the next station found.
Selecting stations via the station
presets
Quick setting: press a number key, e.g.
X
H.
To select directly within the station
X
presets: select Presets by sliding VÆ and
2010-05-31T09:21:57+02:00 - Seite 121
Version: 3.0.3.6
turning cVd the COMAND controller and
press W to confirm.
or
Press W the COMAND controller when the
X
display/selection window is active.
The station preset menu appears. The #
dot indicates under which preset the
currently selected station is stored.
Select a station by turning cVd and press
X
W to confirm or press a number key, e.g.
H.
Tuning in stations by entering the
frequency manually
Option 1: press the õ button.
X
Option 2: select Radio in the radio display
X
by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
Select Enter Frequency and press W to
X
confirm.
Irrespective of the option used, an input
menu will appear.
Enter a frequency using the number keys.
X
COMAND tunes in to the frequency
entered.
Waveband Frequency
AM (MF) 530 – 1700 kHz
FM (VHF) 87.7 – 107.9 Mhz
WB (Weather Band) Weather report
channels
i
You can only enter currently permitted
numbers.
i
If you enter a frequency in the FM or AM
wavebands which is outside the frequency
range, COMAND tunes in to the next lower
frequency.
Radio mode
121