Mercedes-Benz COMAND MY11 Operating Instructions Manual page 154

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
DVD video mode
152
Vehicle equipment
i
These Operating Instructions describe all
standard and optional equipment available
for your vehicle at the time of purchase.
Please note that your vehicle may not be
equipped with all features described.
General information
Automatic picture shutoff
If the vehicle is traveling faster than
approximately 3 mph, the image switches off
automatically in video DVD mode.
The following message appears in the display:
In order not to distract you from
the traffic situation, the picture
is faded out while the vehicle is in
motion.
As soon as the vehicle speed falls below
approximately 3 mph, the image switches
back on.
Basic settings
Picture settings
Adjusting the brightness, contrast or
color
Press W the COMAND controller to show
X
the menu.
Select DVD-Video by sliding VÆ and
X
turning cVd the COMAND controller and
press W to confirm.
A menu appears.
Select Brightness, Contrast or Color by
X
turning cVd the COMAND controller and
press W to confirm.
2010-05-31T09:21:57+02:00 - Seite 152
Version: 3.0.3.6
Changing the picture format
Press W the COMAND controller to show
X
the menu.
Select DVD-Video by sliding VÆ and
X
turning cVd the COMAND controller and
press W to confirm.
A menu appears.
Select 16:9 Optimized, 4:3 or
X
Widescreen and press W to confirm.
The ä icon indicates the format currently
selected.
Select a setting by turning cVd the
X
COMAND controller and press W to
confirm.
DVD video mode
Safety notes
G
Warning!
COMAND is classified as a Class 1 laser
product. You must not open the casing. If you
open the casing, or if the casing is faulty or
damaged, there is a risk of exposure to
invisible laser radiation. This may damage
your eyes, or those of others.
COMAND does not contain any parts that can
be serviced by the user. For safety reasons,
all maintenance work must be carried out by
qualified aftersales technicians.
G
Warning!
Only when the vehicle is stationary should
you:
load a disc
R
eject a disc
R
There is a risk of being distracted from the
road and traffic conditions if this is done while
the vehicle is in motion.