Mercedes-Benz COMAND MY11 Operating Instructions Manual page 182

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
AUX mode
180
Selecting the active COMAND source
Select Aux in the menu using the
X
9=; buttons on the remote
control and press the 9 button to confirm.
Select Source from the AUX menu and
X
press the 9 button to confirm.
Select COMAND Audio and press 9 to
X
confirm.
The audio or video mode selected in
COMAND is transmitted to the Rear Seat
Entertainment System.
Operating with an active COMAND
source
You can transfer an audio or video mode
selected in COMAND to the Rear Seat
Entertainment System.
i
If you subsequently switch modes in
COMAND, the new source will not be
transmitted to the Rear Seat Entertainment
System.
To switch on the function in COMAND:
X
switch on the desired audio mode in
COMAND or show the menu in video DVD
mode.
Select the menu item at the bottom left,
X
e.g. CD in audio CD mode, by sliding VÆ
and turning cVd the COMAND controller
and press W to confirm.
Select Active Aud./Vid. Source for
X
the Rear and press W to confirm.
2010-05-31T09:21:57+02:00 - Seite 180
Version: 3.0.3.6
In the status bar at the top, you will see the
headphones icon and the _ icon for the
source that has been switched on.
To switch off the function in COMAND:
X
switch on the desired audio mode in
COMAND or show the menu in video DVD
mode.
Select the menu item at the bottom left,
X
e.g. CD in audio CD mode, by sliding VÆ
and turning cVd the COMAND controller
and press W to confirm.
Select _Rear Audio/Video Off and
X
press W the COMAND controller to
confirm.
Setting the brightness/contrast/
color
Select Source in the rear-compartment
X
screen and press the 9 button on the
remote control to confirm.
Select Display Aux or Disk Drive Aux
X
and press the 9 button to confirm.
Select Brightness, Contrast or Color
X
and press the 9 button to confirm.
A setting scale appears.
Select a setting using the 9 or :
X
button and press the 9 button to confirm.