Reception And Transmission Volume; Using The Telephone - Mercedes-Benz COMAND MY11 Operating Instructions Manual

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
If you select No, the process will be aborted.
i
Before re-authorizing the mobile phone,
you should also delete the device name MB
Bluetooth from your mobile phone's
®
Bluetooth list.
Telephone basic menu (Bluetooth
interface)
Press the ÷ function button on COMAND.
X
If the mobile phone is ready for use, the
following display appears:
Phone status
:
Signal strength of mobile phone network
;
Ä
Receiver icon: ¢ or ¡
=
To display the COMAND phone book
?
To display call lists
A
Character bar
B
Name of mobile phone currently
C
connected

Reception and transmission volume

Once the mobile phone has been authorized,
you can optimize the transmission and
reception volume settings. Find out more
about the optimum settings for your mobile
on the Internet at
http://www.mbusa-mobile.com. Or call
the Mercedes-Benz Customer Assistance
Center at
1-800-FOR-MERCedes (1-800-367-6372)
2010-05-31T09:21:57+02:00 - Seite 103
Version: 3.0.3.6

Using the telephone

(for the USA) or Customer Relations at
1-800-387-0100 (for Canada).
i
Incorrect settings may have a significant
impact on the quality of calls.
Press the ÷ function button.
X
Select Phone in the telephone basic menu
X
by turning cVd the COMAND controller
®
and press W to confirm.
Select Adjust Volume and press W to
X
confirm.
Select Reception Volume or
X
Transmission Volume and press W to
confirm.
Select a volume setting by turning cVd the
X
COMAND controller.
To close the setting scale: press W or
X
slide XVY.
Using the telephone
Incoming call
Rejecting or accepting a call
When there is an incoming call, you see a
corresponding window in the display.
103
Z