Mercedes-Benz COMAND MY11 Operating Instructions Manual page 109

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Select the characters of the entry you are
X
searching for one by one and press W to
confirm.
When the selection is clear, COMAND
switches automatically to the selection list.
To complete the search: switch from the
X
phone book with character bar to the
selection list (
Y
The last list entry is automatically
highlighted.
With number pad
Alternatively, you can also enter digits using
the number keypad (direct entry)
( page 28).
Y
Deleting characters
To delete a single character: select the
X
2 icon by turning cVd the COMAND
controller and briefly press W.
or
Briefly press the 2 button.
X
Each time a character is deleted, the entry
most closely resembling the remaining
characters is shown at the top of the list.
To delete an entry: select the 2 icon
X
by turning cVd the COMAND controller
and press W and hold until the entry has
been deleted.
or
Press and hold the 2 button until the
X
entire entry has been deleted.
Changing the language of the character
bar
Select B and press W.
X
Select the desired language.
X
page 107).
2010-05-31T09:21:57+02:00 - Seite 107
Version: 3.0.3.6
Using the phone book
Changing the character set of the
character bar
Select p and press W to confirm.
X
The character set changes each time you
make this selection.
Selecting an entry directly from the list
You can switch to the list at any time during
character entry.
Slide VZ the COMAND controller
X
repeatedly or press and hold W until the
character bar disappears.
or
Select ¬ and press W to confirm.
X
To select an entry: turn cVd the
X
COMAND controller until the desired entry
is highlighted and press W to confirm.
To select a phone number: if an entry
contains more than one phone number, this
is indicated by the G icon.
Select a phone book entry with the G icon
X
and press W to confirm.
The sub-entries appear. The G icon
changes to I.
Expanded address book entry
:
Address book entry with sub-entries
;
Select a sub-entry by turning cVd and
X
press W to confirm.
107
Z