Mercedes-Benz COMAND MY11 Operating Instructions Manual page 131

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
The DVD changer loads the disc into the
selected magazine tray. You see the
Loading Disc <x>... message.
i
It may take some time for the disc to be
loaded, depending on the type of disc. If no
disc is inserted for approximately 20
seconds, the display returns to the
magazine menu.
The DVD changer plays the disc if:
it has been inserted correctly.
R
it is a permissible type of disc.
R
Magazine tray contains a disc (eject
:
function is available)
Empty magazine tray (disc can be loaded)
;
To exit the menu: press the 8 eject/
X
load button again or press the k button.
or
Select Back by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
To fill empty magazine trays: press the
X
8 load/eject button.
The magazine menu appears.
Select Fill Empty Slots.
X
You see the Please Wait... message.
COMAND switches to the next empty
magazine tray. You then see the Please
Insert Disc <x> message.
i
Never insert a data medium before
COMAND prompts you to do so. Never
insert more than one disc at a time into a
magazine tray.
2010-05-31T09:21:57+02:00 - Seite 129
Version: 3.0.3.6
Audio CD/DVD and MP3 mode
Insert a disc into the disc slot with the
X
printed side facing upwards.
You see the Please Wait... message.
Once the disc is loaded, the DVD changer
switches to the next empty tray. You see
the Please Insert Disc <x> message.
Repeat this step until all trays are loaded.
X
The DVD changer will play the last disc
loaded if it has been inserted correctly and
is of a permissible type. This applies even
if not all trays have been loaded with a disc.
To complete the insertion: press the
X
8 eject/load button again or press the
k button.
Ejecting discs from the DVD changer
If you remove one disc while playing another
disc, the DVD changer interrupts playback.
Playback continues once the disc has been
ejected.
To eject a CD/DVD: press the 8 load/
X
eject button.
or
Select Back by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
The magazine menu appears. The magazine
tray containing the current disc is
highlighted.
Ejecting is possible
:
Type of data medium
;
Disc name (only if stored on the disc)
=
Current disc
?
129
Z