Mercedes-Benz COMAND MY11 Operating Instructions Manual page 159

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Make a selection from the further options,
if necessary.
COMAND then switches back to the DVD
menu.
i
Depending on the DVD, the menu items:
Back (to movie), Play,
Stop, ., / or Go Up may not
function or not function at certain points in
the DVD menu. You will see the K icon in
the display as an indicator.
Stopping a film or skipping to the
beginning or end of a scene
Select any menu item from the DVD menu.
X
The menu appears.
To stop the film: select the Stop menu
X
item and press W to confirm.
To skip to the end of a scene: select
X
the / menu item and press W to
confirm.
To skip to the beginning of a scene:
X
select the . menu item and press W to
confirm.
Moving up one level in the DVD menu
Press the k button.
X
or
Select the corresponding menu item in the
X
DVD menu and press W the COMAND
controller to confirm.
or
Select any menu item in the DVD menu and
X
press W the COMAND controller to
confirm.
Select Go Up and press W to confirm.
X
Going back to the movie
Press the k button repeatedly until you
X
see the film.
or
Select the corresponding menu item in the
X
DVD menu.
2010-05-31T09:21:57+02:00 - Seite 157
Version: 3.0.3.6
DVD video mode
Select the Back (to movie) menu item in
X
the menu and press W to confirm.
Setting the language and audio
format
This function is not available on all DVDs. If it
is available, you can set the DVD menu
language, the audio language or the audio
format. The number of settings is determined
by the DVD content. It is possible that the
settings may also be accessed in the DVD
menu ( page 156).
Y
Press W the COMAND controller to show
X
the menu.
Select DVD-Video in the menu by turning
X
cVd the COMAND controller and press
W to confirm.
Select DVD Functions and press W to
X
confirm.
Select Menu Language or Audio
X
Language and press W to confirm.
In both cases, a menu appears after a few
seconds. The # dot in front of an entry
indicates the currently selected language.
Select a setting by turning cVd the
X
COMAND controller and press W to
confirm.
To exit the menu: slide XVY the COMAND
X
controller.
Subtitles and camera angle
These functions are not available on all DVDs.
The number of subtitle languages and camera
angles available depends on the content of
the DVD. It is possible that the settings may
also be accessed in the DVD menu
( page 156).
Y
Press W the COMAND controller to show
X
the menu.
Select DVD-Video in the menu by turning
X
cVd the COMAND controller and press
W to confirm.
157
Z