Mercedes-Benz COMAND MY11 Operating Instructions Manual page 30

ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Operating COMAND
28
Select E, W, space, Y in succession,
X
confirming each by pressing W.
Entering characters using the number
keypad
Press number key B twice in quick
X
succession to select the letter N.
Once a button has been pressed, the
character display appears at the bottom of
the display. The first available letter is
highlighted.
You see which characters you can enter with
that button. Each time the button is pressed,
the next character is selected.
Example number key B:
press once = M
R
press twice = N
R
press three times = O
R
Wait until the character display goes out.
X
The entries matching your input are shown
in the list.
Enter E, W, space, Y using the corresponding
X
keys.
i
Enter the space with number key 9.
Further functions in the list with
character bar
To delete characters: select 2 by
X
sliding VÆ and turning cVd the COMAND
controller and press W to confirm.
or
Press the 2 button next to the
X
COMAND controller.
2010-05-31T09:21:57+02:00 - Seite 28
Version: 3.0.3.6
To delete an entry: select the 2
X
symbol by sliding VÆ and turning cVd the
COMAND controller and hold W until the
entire entry has been deleted.
or
Press the 2 button next to the
X
COMAND controller and hold it until the
entire entry is deleted.
To switch the character set: select
X
B and press W to confirm.
To cancel an entry: select the k icon
X
in the bottom left of the character bar and
press W to confirm.
or
Press the k button.
X
The address entry menu appears.
To accept the first list entry: press and
X
hold the COMAND controller W until the
address entry menu appears.
The accepted list entry appears.
Calling up the list as a selection list
Select the desired city from the selection list.
If there are several entries for a city or if
several cities of the same name are stored,
then ¬ is highlighted in the character bar.
Press the W COMAND controller.
X
It is also possible to switch the list of cities to
the selection list at any time during character
input.
Slide the COMAND controller W
X
repeatedly until the city list appears as a
selection list.
or
Select ¬ in the character bar by turning
X
cVd the COMAND controller and press
W to confirm.