Parameter Descriptions
The parameters indicated with "#" must be changed while the card is in the "STOP" status (see "2.3.1
Status Control"). The changes must be followed by a reboot to become effective (see "2.5.1 Reboot").
IP Address Settings
Parameter & Description
#
IP Address
Specifies the IP address of the card.
For more information, consult your network
administrator.
#
Subnet Mask
Specifies the subnet mask address of the card.
For more information, consult your network
administrator.
#
Default Gateway
Specifies the default gateway IP address of the card.
For more information, consult your network
administrator.
DHCP Settings
Parameter & Description
#
DHCP Server
Specifies the use of a DHCP server.
For details, refer to "Detailed Explanations".
#
DHCP Server Port No.
Specifies the port number for DHCP communications
by the DHCP server.
Generally, there is no need to change the default value.
DHCP Client Port No.
#
Specifies the port number for DHCP communications
by the card (the DHCP client).
Generally, there is no need to change the default value.
#
DHCP Lease Time (min) 1-1440 min
This parameter is provided for engineer use only.
Default
Value Range
192.168.1.200
The following addresses
are invalid:
•
Class D addresses
•
Class E addresses
•
Loopback
addresses
•
Addresses with
host number all 0s
or 1s
255.255.255.0
Any address is valid.
0.0.0.0
Same as the parameter
IP Address, except that
the address 0.0.0.0. is
allowed.
Default
Value Range
Don't use
Use,
Don't use
67
1 to 65535
68
1 to 65535
1440
0 (disable),
1 to 1440
Programming Guide
2.2 Programming
11