Exterior: Rear View - Ricoh CL7000 Setup Manual

Exterior: Rear View

1
2
3
4
5
1.
Vent and dustproof filter
This helps keep internal components
from overheating. Do not block or ob-
struct the vent. Malfunctions may occur
due to overheating. Remove the vent to
replace the internal dustproof filter.
2.
Connector board
Connect the main power cable, cables
from options, etc. to the appropriate port.
3.
Duplex unit port
Connect the cable for the duplex reversal
unit to this port.
4.
4-bin mailbox/2 tray finisher port
Connect the cable for the 4-bin mailbox or
the 2 tray finisher to this port.
8
5.
Power port
Connect the power cable to this port and
the other end to the wall outlet.
6.
Upper left cover
Open this to remove misfed paper or
when replacing the fusing unit.
7.
External tray
Printed output is stacked here with the
print side up.
8.
Vents
These help keep components inside the
printer from overheating. Do not block or
obstruct the vents. Malfunctions may oc-
cur due to overheating.
Exterior: Rear View
6
7
ZHXH830N
1
3