Ricoh CL7000 Setup Manual page 14

Guide to Printer Parts
8.
Upper right cover
Open this to replace the toner cartridge.
9.
Vent
This helps keep internal components
1
from overheating. Do not block or ob-
struct the vent. Malfunctions may occur
due to overheating.
10.
Controller board
Slide this out to install options such as the
memory unit, 1394 interface unit, USB in-
terface board, 802.11b interface unit, user
account enhance unit or printer hard
disk.
Plug cables such as the parallel interface
cable and Ethernet cable into their con-
nectors.
11.
Parallel port
Use a parallel cable to connect the printer
to the host computer.
12.
Ethernet port
Use a network interface cable to connect
the printer to a network.
13.
Bypass tray extension
Pull this out to load paper in the bypass
tray when its length is longer than A4 L.
14.
Bypass tray
Use to print on thick paper, OHP trans-
parencies, custom size paper, and plain
paper. Up to 100 sheets of plain paper can
be loaded.
15.
Vent
This helps keep internal components
from overheating. Do not block or ob-
struct the vent. Malfunctions may occur
due to overheating.
16.
Right cover
Open this to remove misfed paper.
2