Installing The Duplex Reversal Unit - Ricoh CL7000 Setup Manual

Installing the Duplex Reversal
Unit
A A A A
Using both hands, hold the du-
plex reversal unit level, and then
insert the hooks into the groove of
the stand. Align the hook tips
with the line on the stand, as
shown, and then insert slowly.
Do not let go of the duplex rever-
sal unit even after insertion.
The hooks of the duplex reversal
unit clip around the bar inside the
groove of the stand.
B B B B
While supporting the duplex re-
versal unit, remove the stopper
the printer's mounting bracket.
This stopper will be used in a later
E
step , so take care not to lose it.
C C C C
While supporting the duplex re-
versal unit, remove the adhesive
tape, and then hold the auxiliary
bar in front of the hook on the left
side, and then stand it up.
D D D D
Hook the hole of the auxiliary bar
o nt o th e pr in ter 's mo u nti ng
bracket.
ZHXH250J
E
In step
the position with the perforated
line, as shown.
ZDJP046J
Duplex Unit Type 7000
, move the auxiliary bar to
4
ZDJP047J
ZDJP048J
77