Formatting The Printer Hard Disk Drive - Ricoh CL7000 Setup Manual

❒ After finishing the installation,
you can check the printer hard
disk is installed properly: Print
the configuration page from the
"List/Test Print" menu and
check the items in "System Ref-
erence". If it is installed proper-
ly, you will see "Printer Hard
D isk Driv e" a p p e a r u n d e r
"Controller Option".
❒ If the printer hard disk is not in-
stalled properly, repeat the pro-
cedure from step
cannot install it properly even
after reinstallation, contact your
sales or service representative.
Formatting the Printer Hard
Disk Drive
If it becomes necessary to format the
printer hard disk after initial setup,
execute "HDD Format" in the Main-
tenance menu.
Important
❒ Formatting the printer hard disk
will delete all data.
A A A A
Press { { { { Menu} } } } .
On Line Menu
Job Reset Form Feed
Power Error
The menu appears on the display.
B B B B
C C C C
A
. If you
D D D D
Escape
#
Enter
Data In
E E E E
ZDJS001N
Printer Hard Disk Type 7000
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "
Maintenance", and then press
{ { { { Enter#} } } } .
Menu:
Maintenance
The menu for selecting Mainte-
nance items appears.
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "HDD
Format", and then press { { { { Enter#} } } } .
Maintenance:
HDD Format
A check message appears.
Note
❒ If "HDD Format" is not dis-
played on the display, the print-
er hard disk is not installed
properly. Repeat the procedure
A
from step . See p.70 "Printer
Hard Disk Type 7000". If you
still cannot install it properly,
contact your sales or service
representative.
Important
❒ To avoid malfunction do not
turn off the power while for-
matting the printer hard disk.
Press { { { { Enter#} } } } .
The printer hard disk is formatted,
and a restart message appears.
Turn off the power once, and then
turn the power back on.
The printer hard disk format is
completed, and now ready for use.
4
73