Installing Options - Ricoh CL7000 Setup Manual

Installing Options

R CAUTION:
• Before installing options, the machine should be turned off, and then un-
plugged for at least an hour. Components inside the machine become very
hot, and can cause a burn if touched.
• Before moving the machine, unplug the power cable from the outlet. If the
cable is unplugged with sudden force, it could become damaged. Damaged
plugs or cables can cause an electrical fire hazard.
• When lifting the machine, use the grips on both sides. The machine could
break or cause injury if dropped.
By installing options, you can improve printer performance and have a greater
variety of features to use. For details about each option, see Administrator Refer-
ence.
When installing multiple options on the printer, we recommend installation in
the following order.
❖ ❖ ❖ ❖ Flow of Option Installation
A
Attach the 500, 1000-sheet pa-
per feed unit, or 2000-sheet
Large Capacity Tray.
(Paper Feed Unit Type 3800C,
Paper Bank PS470)
T
B
Install the SDRAM module.
(Memory Unit TypeC)
T
4. Installing Options
Attach the paper feed unit to the bottom of the printer.
You can install the Paper Feed Unit Type 3800C (500 × 1),
Paper Feed Unit Type 3800C (500 × 2) or Paper Bank PS470.
If you install the Paper Bank PS470, you can load up to
3,100 sheets of paper at once.
Install the module in the controller board's SDRAM mod-
ule slot.
There are three types of Memory Unit TypeC: 64 MB, 128
MB, and 256 MB.
*1
33