Ricoh CL7000 Setup Manual page 5

R WARNING:
• Only connected the machine to the power source described on the
inside front cover of this manual.
• Avoid multi-wiring.
• Do not damage, break or make any modifications to the power
cord. Do not place heavy objects on it, pull it hard or bend it more
than necessary. These actions could cause an electric shock or
fire.
• Do not plug or unplug the power cord with your hands wet. Other-
wise, an electric shock might occur.
• Make sure the wall outlet is near the machine and freely accessible
so that in event of an emergency it can be unplugged easily.
• Do not remove any covers or screws other than those specified in
this manual. Some parts of the machine are at a high voltage and
could give you an electric shock. Also, if the machine has laser
systems, direct (or indirect) reflected eye contact with the laser
beam may cause serious eye damage. When the machine needs to
be checked, adjusted, or repaired, contact your service represen-
tative.
• Do not take apart or attempt any modifications to this machine.
There is a risk of fire, electric shock, explosion or loss of sight. If
the machine has laser system, there is a risk of serious eye dam-
age.
• If the machine looks damaged or breaks down, smoke is coming
out, there is a strange smell or anything looks unusual, immediate-
ly turn off the operation and main power switches then unplug the
power cord from the wall. Do not continue using the machine in
this condition. Contact your service representative.
• If metal, liquid or foreign matter falls into the machine, turn off the
operation and main power switches, and unplug the main power
cord. Contact your service representative. Do not keep using the
machine with a fault or defect.
• Do not put any metal objects or containers holding water (e.g. vas-
es, flowerpots, glasses) on the machine. If the contents fall inside
the machine, a fire or electric shock could occur.
• Do not incinerate used toner or toner containers. Toner dust might
ignite when exposed to an open flame. Dispose of the used toner
containers according to local regulations for plastics.
• Confirm that the wall outlet is near the machine and freely acces-
sible, so that in event of an emergency, it can be unplugged easily.
• To avoid hazardous electric shock or laser radiation exposure, do
not remove any covers or screws other than those specified in this
manual.
iii