Ricoh CL7000 Setup Manual page 87

B B B B
Remove the adhesive tape and
packing materials.
Important
❒ Do not remove the adhesive
tape holding the auxiliary bar
yet. Remove it in step
"Installing the Duplex Reversal
Unit".
❒ Do not remove the adhesive
tape holding the cable of the du-
plex reversal unit yet. Remove it
G
in step on p.77 "Installing the
Duplex Reversal Unit".
C C C C
Turn off the power, and then un-
plug the power cable from the
wall outlet.
D D D D
Slowly open the front cover of the
printer, remove the green screw-
driver, and then close the cover.
Reference
p.37 "Using the Screwdriver"
E E E E
Lift the external tray in the direc-
tion of the arrow (A A A A ), and then re-
move (B B B B ).
C
on p.77
F F F F
Remove the two small covers on
the upper left cover of the printer.
A Open the upper left cover.
ZDJP711J
B Remove the two small covers
ZHXH221J
C Close the upper left cover.
Duplex Unit Type 7000
by pinching and pulling them
in the direction of the arrow.
Note
❒ You cannot use the two re-
moved covers.
ZDJP038J
4
ZHXH230J
ZHXH241J
75